Jump to content

Recommended Posts

Hello,

I have used the official component cable for my original Xbox for years without any issues, until now. This is what happens:
Please login or register to see this link.

This only seems to happen on menu's. No problems in-game so far.

At first, I thought the cable was damaged, so I bought a Kaico HDMI adapter to replace it, but this is what happens when I use it:
Please login or register to see this link.

I decided to grab my older Xbox from the attic for testing and both cables work perfectly on that console, so I think the cables are not the issue.

I'm no expert at all, so can somebody tell me what's going on with my console? Can it be fixed?

Share this post


Link to post
Share on other sites
21 minutes ago, Y-Stylzz said:

Hello,

I have used the official component cable for my original Xbox for years without any issues, until now. This is what happens:
Please login or register to see this link.

This only seems to happen on menu's. No problems in-game so far.

At first, I thought the cable was damaged, so I bought a Kaico HDMI adapter to replace it, but this is what happens when I use it:
Please login or register to see this link.

I decided to grab my older Xbox from the attic for testing and both cables work perfectly on that console, so I think the cables are not the issue.

I'm no expert at all, so can somebody tell me what's going on with my console? Can it be fixed?

Your videos are private. 

Share this post


Link to post
Share on other sites
1 hour ago, OGXbox Admin said:

What do the caps on your board look like? Got any pix?

I don't have the proper tools to open the console yet, so I can't show any pictures right now.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By tjd2
      So i tried to upgrade my 1.1 xbox to 128mb.
      I installed the first chip successfully and xblastOS flashed to TSOP said "Success". Then i attempted to install second chip on bottom side, but xbox started fragging. I fixed up some shorts i found, but it still fragged. Then i measured according to datasheet, that power to RAM is shorted to ground. The shorted pins most likely were: 66 and 65. However it's possible, that i used the chip pinout wrongly and i measured short between VDD and VDDQ, which should be fine.
      Even after fixing the shorts, it still fragged. After (destructively, but fortunately without ripping any trace) removing the both installed chips, it still does very weird frag. Basically the LED lights up only for short while and then turns off. Xbox's fan runs for a while and then it reboots. This gets repeated indefinitely, but rarely you get normal FRAG and xbox stays on. I measured 2.65V going to the VDDQ pin and the RAM power rail or any of the main power rails are NOT shorted now.
      ANyone knows if i can fix it? All my other xboxes are either fragging (i have 1.0 i got fragging, but it might be TSOP issue as there are no signs of tracerot, no leaking caps and apparently TSOP might naturally degrade now, so i ordered modchip and will try to install it) or they are 1.6, which suck
      IMAGES: Please login or register to see this link.
      Here is reference image how i installed one of the chips, that worked well (the first one). I guess it was pretty good: Please login or register to see this link. . The residue is either flux or denaturated ethanol i used to clean it up.
      VIDEO: 
       
       
    • By Wingman
      Hello everyone, my name is Vitalij and I am from latvia ! 
      I have two xbox v1.1 and v1.6  in 1.1 dump of something (red-green light), but fully working power supply and 1.6 working, but the mosfet burned out in the power supply.
      Is it possible to make a 1.1 to 1.6 PSU, can there be a complete manual or something? I found a guide showing how to make from 1.1 to 1.2-1.5, but as I understand it, this does not work for me.
      Could you please help with this?
      Please login or register to see this code. Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.
    • By GameBreaker64
      Hello all! I'm looking for some footage of Xbox Live recorded before the shutdown in 2010. All I can find on YouTube are a bunch of Halo 2 videos, some PGR2, and a tiny bit of SWBF2. If anyone has some stuff they're willing to share, please reply!

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.