Hi, I’m new to anything to do with mod chips on the original Xbox so my apologies if I sound like a complete noobie.
I recently purchased a Xbox of Facebook market place that has a DuoX2 (blue) mod chip installed. When the console boots is has like a green logo in the top left and Slayers 2.7 underneath the Xbox logo at the bottom of the screen (I’ll add a photo to explain what I’m talking about). Then it boots into evolutionX dashboard I believe.
I’ve dabbled with soft modded Xboxes before and wanted to take a crack at a mod chipped one but I’m worried I’ll brick the console if I just try and re flash bios and install a new dashboard. So long story short, is it possible to update the bios on the mod chip to someone a little more recent like EvoX M8 or something? The Xbox is 1.4 console. I opened it and cleaned the console of dust and re did the thermal paste and fixed the DVD belt prior to wanting to update the dashboard and mod chips Bios.
New to the forum and to the topic in general.
The console was given to me by a friend, it comes loaded with some version of Unleash X. I have been trying to connect via FTP to load more games (DVD reader is broken).
Sadly i don't know the credentials and not finding any way inside the dashboard to go to the config.xml file to get them.
I read about FATXplorer so I guess that if I don't find any alternative from inside. I can always just plug in and look for the file on my PC but I will like to avoid buying all the adapters just for a one time use.
Couple of pics from the menus that I can access (In Spanish lol)
https://ibb.co/XWMmkfn https://ibb.co/C8GHv9J https://ibb.co/kJ0y2tF
What the title says. I've flashed my smart xx with X2 5032 and tried manipulating both the text file in the e-petition as well as as using X2 config maker to confirm that the DVD check is removed.
Unfortunately it just refuses to boot I know that the config is working because the wireframe flubber shows up but it will just sit endlessly loading after that.
It boots correctly with a drive plugged in.
Any help?
Recommended Posts
Similar Content
I recently purchased a Xbox of Facebook market place that has a DuoX2 (blue) mod chip installed. When the console boots is has like a green logo in the top left and Slayers 2.7 underneath the Xbox logo at the bottom of the screen (I’ll add a photo to explain what I’m talking about). Then it boots into evolutionX dashboard I believe.
I’ve dabbled with soft modded Xboxes before and wanted to take a crack at a mod chipped one but I’m worried I’ll brick the console if I just try and re flash bios and install a new dashboard. So long story short, is it possible to update the bios on the mod chip to someone a little more recent like EvoX M8 or something? The Xbox is 1.4 console. I opened it and cleaned the console of dust and re did the thermal paste and fixed the DVD belt prior to wanting to update the dashboard and mod chips Bios.
any help is much appreciated.
Kind Regards, Karl
The console was given to me by a friend, it comes loaded with some version of Unleash X. I have been trying to connect via FTP to load more games (DVD reader is broken).
Sadly i don't know the credentials and not finding any way inside the dashboard to go to the config.xml file to get them.
I read about FATXplorer so I guess that if I don't find any alternative from inside. I can always just plug in and look for the file on my PC but I will like to avoid buying all the adapters just for a one time use.
Couple of pics from the menus that I can access (In Spanish lol)
https://ibb.co/XWMmkfn
https://ibb.co/C8GHv9J
https://ibb.co/kJ0y2tF
Unfortunately it just refuses to boot I know that the config is working because the wireframe flubber shows up but it will just sit endlessly loading after that.
It boots correctly with a drive plugged in.
Any help?
Board Life Status
Board startup date: April 23, 2017 12:45:48