Jump to content
Sign in to follow this  
shadowfire36

Open XEnium Modchip D0

Recommended Posts

Ground the D0 from the main board.

You can put the D0 wire under one of the screws

 

Cheers

SS Dave


Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.
 

Share this post


Link to post
Share on other sites

This is the one I use.

200.jpg.688e88a1aac7766c70db4926584a0078.jpg

 

Cheers

SS Dave


Soft modding is like masturbating, It get's the job done but it's nothing like the real thing.
 

 

  • Thanks 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By excaliburn92
      Hello. 
      I posted about this a while back on Reddit but eventually I gave up and softmodded instead. However, it's kinda ... what's the word for it... irritating to have a non-working modchip as I want to have a backup plan incase my DVD Drive fails, or the other NTSC Xbox that I unintentionally potentially killed by swapping its 1.6b Board into a translucent 1.4 case and 1.4 power supply (EU 230V)... (yeah not proud of that) comes to life. I have no way of confirming if it still works as I have no step down voltage converter, BUT if it does, it'll have no DVD Drive. The plan is, I want to get this modchip working first, if possible. I've tried resoldering the wires, the modchip itself, and it won't work. No evo logo, nothing. All it does is play original games. Motherboard is a 1.4 according to UnleashX. Here's a picture:
      Please login or register to see this link.
      Is it dead? I assume it used to work before, as it was installed when I received the console (got it for really cheap, had error 7, swapped dvd drive and it works). Is anything looking out of the ordinary? 
    • By k0mpresd
      gerber files for xblast lc4032 type modchip. program lattice with xladdin xblast svf. program 49lf080a with 512, 256, and xblast os = 1mb. tested, works. short s1 to boot 512kb bios, short s2 to gnd to boot 256kb bios. cheers, internet world. hope someone makes use of these files.   Please login or register to see this link.
    • By Paw
      Hi guys i just found my old xbox in the basement and by the look of things it looks like its hardmoded with a Xecuter chip and there is even a 120gb drive installed and all is working without any issues. My main question is if anyone here could help me identify what kind of Xecuter chip this is, because my plan is that i would like to replace the 120gb drive with a 1tb but im getting a LBA48 warning when i try to partition the new disk and its asking me to ugrade the current bios with a new one that supports LBA48.
      Current INFO:
      Bios: Xecuter2 4976.02
      Kernel 1.00.5838.01
      Xbox v1.1
      What would be the best course of action, how should i approach the reflashing, what bios should i pick so that the new 1tb drive works as intended and ofcause what should i think about when i approach all this?
       
       
      Please login or register to see this attachment.
      Please login or register to see this attachment.
      Please login or register to see this attachment.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.