Jump to content
naits

Modchip Question

Recommended Posts

Hello guys! I just dug through every single corner of my parents basement.. With success I found my first ogXbox! That I remember my dad knew someone who modded those. I also remember it was of course. Tons of installed games :D But my question, what modchip is this? I can't really remember what it was... And I can't turn it on yet.... Have to remove clock cap, cleaning and so on.

So now I've got my first OGXbox and my new OGXbox :D 

Some pictures: (Please login or register to see this link. )

spacer.png

 

Share this post


Link to post
Share on other sites

Don't find installation instructions on that exact version.  It seems to have had a short lifetime as the Wayback Machine's captured pages are for installation of the X2.3B Lite.  Nothing easily found from the time teamxecuter's website went from Tutorials Coming Soon (12/31/2003) until X2.3B Lite Wire or Pin header installs (02/14/2004) or LitePlus tutorials were saved.  There's a couple month gap where the Wayback Machine was not capturing new content of the teamxecuter.com website.

Share this post


Link to post
Share on other sites
50 minutes ago, KaosEngineer said:

Xecuter 2.3 Lite

More pictures can be found of it Please login or register to see this link. (Scroll down till you see the version you have).

 

 

31 minutes ago, KaosEngineer said:

Don't find installation instructions on that exact version.  It seems to have had a short lifetime as the Wayback Machine's captured pages are for installation of the X2.3B Lite.  Nothing easily found from the time teamxecuter's website went from Tutorials Coming Soon (12/31/2003) until X2.3B Lite Wire or Pin header installs (02/14/2004) or LitePlus tutorials were saved.  There's a couple month gap where the Wayback Machine was not capturing new content of the teamxecuter.com website.

Thank you or the link :) It was already installed when I opened my old Xbox. So I am good :D Just finished removed clock cap and cleaned the mobo a bit. It fired up nice. Currently backing up its hard drive. It's most likely never been turned on in like 10 years or so...

 

Its sad that all the info from that website is almost gone.... 

Share this post


Link to post
Share on other sites

xbox-scene.com's web page to pull up the exact installation tutorial for an X2.3lite used PHP to show the proper web page for many different X2.x Lite or Pro modchips and Xbox versions they were installed in.  The Wayback Machine, as far as I've looked, doesn't seem to have all the specific web pages saved for all the various selections that could be made. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By shadowfire36
      is there an alternate place to solder the d0 port than the chip ? im trying to do a hotswap to reflash my other chip
    • By Stingerrray
      Hi I recently installed and openxenium modchip chip. It is working flawlessly. I want to do two things with the Xbox. Number one I want it to play the library of Xbox games. Number to I want to make it an emulation box. Here are the problems I'm running into.
      1) when I try to install Rocky 5 XBMC emu station via FTP it locks up with just a few kilobytes left during the transfer. I have tried to build my own version and use the pre-built version.
      2) second thing is I want to replace the dash with a good dash and I'm looking for recommendations.
      3) is there any software that will rebuild a hard drive to bone stock? Or a listing of what would reside on the hard drive in a bone stock as new Manor?
       
      Thanks in Advance,
      Rob
    • By Pasimys
      Hello,
      i change my hdd drive to bigger 1tb drive and after succesful cloning i tried to format the new drive with XBpartitioner 1.3 and it complained about "LBA48 info not found! etc..(pic bellow) i tried to flash new bios with hexen 2018 but then that complained about "flash not writeable". i wonderd that do i need to get somewhere the newest bios and put it directly to my modchip via usb cable. our am i missing some step in this setup?  
      Please login or register to see this attachment.
      Please login or register to see this attachment.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.