sapi3nt Posted October 23, 2019 Report Share Posted October 23, 2019 (edited) I have a xbox. I softmodded then removed softmod. All went well. Softmodded with unleashx and later removed. All was fine. Then yesterday went to softmod with sid. In middle of process or at end xbox shuts down like normal. Then turned back on and now red/green flashing ring and video is not working. Any ideas? I have tried letting the clock reset but made a sure not to leave the console off more than about 5 to 10 minutes. I have left it on all night trying to find a solution. I am worried if I unplug it or power it off much longer it may turn into a brick. Any ideas? I loaded and backed up everything correctly. I have 2 video cables and checked that as well and no dice any help would be appreciated. The video im sure went out with the new softmod install. Not sure why. Any help would be appreciated. Id rather fix than throw it at the wall lol. Edited October 23, 2019 by sapi3nt Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted October 23, 2019 Report Share Posted October 23, 2019 So you removed the soft mod and now it is not booting. I take it that it's not the original hard drive. Fit a mod chip and start again. SS Dave Those who can hard-mod, Those who can’t soft-mod. Quote Link to comment Share on other sites More sharing options...
satchsatch33 Posted April 4, 2020 Report Share Posted April 4, 2020 Hello, I have exactly the same problem. Maybe I’ll need to fit a modchip, don’t you think ? Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted April 5, 2020 Report Share Posted April 5, 2020 So, where's the flashing a BIOS occur? You only mention installing, removing then reinstalling a softmod? Quote Link to comment Share on other sites More sharing options...
satchsatch33 Posted April 5, 2020 Report Share Posted April 5, 2020 (edited) 13 hours ago, KaosEngineer said: So, where's the flashing a BIOS occur? You only mention installing, removing then reinstalling a softmod? I did exactly the same, I installed a softmod, then removed it to put another thing and first I had error 16, then red/green blinking without video. I didn’t put a modchip or tsop. Edited April 5, 2020 by satchsatch33 Quote Link to comment Share on other sites More sharing options...
satchsatch33 Posted April 8, 2020 Report Share Posted April 8, 2020 Is anyone could help us please ? Quote Link to comment Share on other sites More sharing options...
SS_Dave Posted April 8, 2020 Report Share Posted April 8, 2020 I would fit a mod chip and see if it come's good 1st Cheers SS Dave Soft modding is like masturbating, It get's the job done but it's nothing like the real thing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.