bruybenj Posted March 23, 2019 Report Share Posted March 23, 2019 Hi witch bios allow to boot the xbox without a dvd drive ? and witch config i need to change ? Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted March 23, 2019 Report Share Posted March 23, 2019 All depends what size bank your modchip uses. For 256KB banks: M8plus, iND-BiOS 5003 or the Feb-11-05 Beta (aka 5004) and 512KB bank: X2 5035 iND-BiOS and X2 5035 use a text configuration file that can be edited to disable the DVD check on bootup. Note: HeXEN 2018's M8plus BIOSes have already been configured to remove the DVD check. Use the one for your Xbox version. There are two one for v1.0-1.5 consoles or v1.6s. Quote Link to comment Share on other sites More sharing options...
bruybenj Posted March 23, 2019 Author Report Share Posted March 23, 2019 Just now, KaosEngineer said: All depends what size bank your modchip uses. For 256KB banks: M8plus, iND-BiOS 5003 or the Feb-11-05 Beta (aka 5004) and 512KB bank: X2 5035 iND-BiOS and X2 5035 use a text configuration file that can be edited to disable the DVD check on bootup. Note: HeXEN 2018's M8plus BIOSs, use the one for your Xbox version either the one for v1.0-1.5 consoles or v1.6s. It has already been configured to remove the DVD check. i have 2 xbox a 1.0 and a 1.4 Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted March 23, 2019 Report Share Posted March 23, 2019 If you are TSOP flashing, a 1.0 can use either a 256KB or 512KB sized BIOS. while a 1.4 you can only use a 256KB sized BIOS. Quote Link to comment Share on other sites More sharing options...
bruybenj Posted March 23, 2019 Author Report Share Posted March 23, 2019 Just now, KaosEngineer said: If you are TSOP flashing, a 1.0 can use either a 256KB or 512KB sized BIOS. while a 1.4 you can only use a 256KB sized BIOS. they are tsop on both witch bios do you recommand for the 1.0 and the 1.4 ? Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted March 23, 2019 Report Share Posted March 23, 2019 Most prefer iND-BiOS 5004 I have an X3 modchip so use the X3 BIOS on my system. Many don't like the Evolution-X M8plus BIOS's purple Evo-X shield that gets displayed in the upper left-hand corner of the screen during the bootup animation. Quote Link to comment Share on other sites More sharing options...
bruybenj Posted March 23, 2019 Author Report Share Posted March 23, 2019 Just now, KaosEngineer said: Most prefer iND-BiOS 5004 I have an X3 modchip so use the X3 BIOS on my system. Many don't like the Evolution-X M8plus BIOS's purple Evo-X shield that gets displayed in the upper left-hand corner of the screen during the bootup animation. i have flash iND-BIOS 5004 now which part of the ind-bios.cfg i need to modify Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted March 24, 2019 Report Share Posted March 24, 2019 I don't think there's any setting to change. The DVD check hack is always enabled. Quote Link to comment Share on other sites More sharing options...
bruybenj Posted March 24, 2019 Author Report Share Posted March 24, 2019 Just now, KaosEngineer said: I don't think there's any setting to change. The DVD check hack is always enabled. wen i run the xbox without de dvd drive i get error 13 but with that dvd no error at all Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted March 24, 2019 Report Share Posted March 24, 2019 Error 13 is a dashboard startup error. It shouldn't have anything to do with the DVD not present. Quote Link to comment Share on other sites More sharing options...
bruybenj Posted March 24, 2019 Author Report Share Posted March 24, 2019 Just now, KaosEngineer said: Error 13 is a dashboard startup error. It shouldn't have anything to do with the DVD not present. i don't understand why i gat error 13 without the dvd and with the dvd the xbox work find Quote Link to comment Share on other sites More sharing options...
bruybenj Posted March 25, 2019 Author Report Share Posted March 25, 2019 found the problem by my own i had to plug the hdd at the same place as the dvd player was on the ide cable Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted March 25, 2019 Report Share Posted March 25, 2019 Is the HDD set to CS or MASTER? If CS, try changing it to MASTER and connecting it to the end of the IDE cable. How'd you connect the HDD to the DVD's connector? The IDE cable is so short to get it there. Quote Link to comment Share on other sites More sharing options...
bruybenj Posted March 25, 2019 Author Report Share Posted March 25, 2019 the hdd si set to master am using a 2.5 sata hdd with a adapter ide to sata with the original ide wire Quote Link to comment Share on other sites More sharing options...
KaosEngineer Posted March 26, 2019 Report Share Posted March 26, 2019 You may need to use an 80-wire 40-pin high-speed IDE cable instead of the stock slower speed 40-wire 40-pin cable. Quote Link to comment Share on other sites More sharing options...
bruybenj Posted March 26, 2019 Author Report Share Posted March 26, 2019 12 hours ago, KaosEngineer said: You may need to use an 80-wire 40-pin high-speed IDE cable instead of the stock slower speed 40-wire 40-pin cable. i just recive the 80 wire 40 pin ide and now it work better Quote Link to comment Share on other sites More sharing options...
Magicaldave Posted April 4, 2019 Report Share Posted April 4, 2019 I know this is really not-picky, but those MSI IDE cables look killer. Do you have a link for them? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.