Softmodded pal og xbox no 480p

[joker8722]

I have a pal og xbox softmodded connected to a xedusa I can not get any game to load in any other resolution but 480i or 576i with both pal and ntsc games through hdmi or component running on the ossc.

I would like to get this working  any help would be appreciated I tried to enter high def mode no luck

[lOgIcAl]

2 hours ago, joker8722 said:

I have a pal og xbox softmodded connected to a xedusa I can not get any game to load in any other resolution but 480i or 576i with both pal and ntsc games through hdmi or component running on the ossc.

I would like to get this working  any help would be appreciated I tried to enter high def mode no luck

You need to change the Xbox region to NTSC from PAL. HD resolutions of 480p/720p/1080i only work with NTSC and a suitable HD component cable or HDMI convertor cable or HDMI mod (hardware).

Most people go for a hardmodded console with a modchip. A lot easier than softmod. Use the Enigma to change region from pal to ntsc too.

Hope that helps.

[PRince404]

Xblast OS also allows you to change the region, if you're already soft modded then consider using Cerbios.

[HDShadow]

To swap the Xbox region, hard of softmodded, you should use the Enigmah Region Changer app which is usually a default app provided with most dash installer or softmod packages.

It literally takes just a few seconds to change PAL to NTSC and as long as your TV supports NTSC external input (most PAL TVs have for decades) and a ED/HD AV cable you should have the 480p, 720p and 1080i provide in the video settings menu.

[joker8722]

Thank you for all the help it works wonder now I can play games in the proper mode for better visuals thanks 

[Clooneyblast]

Hey there! I get how frustrating that can be. It sounds like you've run into a common issue with the Xbox softmod set-up. To get the console to support higher resolutions like 720p or 1080i, you might need to ensure that your Xbox's video settings are correctly configured within the softmod dashboard. First, make sure that your console is set to NTSC, as PAL systems didn't originally support HD resolutions. You can typically find an option to switch this in your softmod menu. Additionally, verify that the HD settings are enabled—these should be accessible from the dashboard settings as well.

[Clooneyblast]

On 10/18/2024 at 3:53 PM, Clooneyblast said:

Hey there! I get how frustrating that can be. It sounds like you've run into a common issue with the Xbox softmod set-up. To get the console to support higher resolutions like 720p or 1080i, you might  https://getluckydraw.com/ need to ensure that your Xbox's video settings are correctly configured within the softmod dashboard. First, make sure that your console is set to NTSC, as PAL systems didn't originally support HD resolutions. You can typically find an option to switch this in your softmod menu. Additionally, verify that the HD settings are enabled—these should be accessible from the dashboard settings as well.

If you've confirmed that everything is set up correctly within the dashboard and are still experiencing problems, it could be worth checking your cables. Ensure that you're using the appropriate component cables, as standard definition composite cables won't support HD resolutions.