Search the Community
Showing results for tags 'network'.
Found 3 results
I was running some Halo system link no issue. When I switched over to Brute Force and Mechassault the link failed to see another Xbox.I am using a unmanaged switch. I used one of these back i the day https://www.ebay.com/itm/Radica-Gamester-RC73220-LAN-Party-4-port-hub-and-Gamester-power-supply/164263467360?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649. The question is do some of the old games need a hub not a switch for connection ?
I’m still getting to grips with using the og Xbox in 2020, well setting it up. I’ve got a USB powered WiFi bridge that plugs into the Ethernet port, and is powered directly from the console. But the console starts up quicker than the the bridge can connect. Is there an option I’m missing that will force XBMC4Gamers to check the network again and then it’ll get an IP address? Ta Pete
Hi, First time modder here having some issues with the setup after upgrading the hdd. I have a modchipped v1.6 OG XboX and set it up with a 160 GB IDE hdd using the Hexxen 2018 disc. I also switched to a 80-pin IDE cable. The install went well, and I have uploaded games via ftp and can play them from the hdd. I then created a Emulator folder on E:\ and put a N64 emulator there (Surreal64CE B6.0), and the roms in the Roms folder, but the Emulators-'tab' is not showing when starting the XboX. I installed XBMC from the Hexxen 2018 disc, but there is nothing showing under the System\Emulators tab in XBMC. Also the display in XBMC is too large for the tv-screen, and changing the options (Normal/Widescreen/Letterbox) does nothing. The bullet options for 460, 720 and so on in XBMC display settings are greyed out, and I cannot use them. This is also true for the display settings in the XboX Admin/Settings in the dash which shows up when I start the XboX, but I got a correct display after disabling Pal-60. Last, I am not able to set a static IP address when switching from DHCP to static. I can input the new IP, but when I click OK, it still says IP: 0.0.0.0. The display and ftp issues are not serious per se, but I would like it all to be in working order, and not being able to play the emulators is a bummer. I have bought a 2TB hdd, and am currently waiting for a Startech IDE to Sata adapter to arrive, and was hoping to have it all working when upgrading to the Sata disk. My option now is to try the whole procedure again and see, but don't know if it will make any difference... Can anyone please help point me in the right direction to get it all working as I would like? -Thank you.
Board Life Status
Board startup date: April 23, 2017 12:45:48