Search the Community
Showing results for tags 'little'.
Found 5 results
I'm new to modding and basically have near zero computer knowledge. I downloaded and unpacked Eartwormjames's 212 pack and I'm a little lost on where to put everything. I'm running the Rocky5 emustation and have a few roms sets running, but the 212 pack is giving me a headache. I'm using filezilla and have moved the roms from the roms folder to the n64 roms folder on my xbox, they are recognized but I get black screen when trying to launch a game. I'm assuming the surreal6.0 needs placed somewhere, or that maybe the 212 pack needs placed somewhere as a whole? Any help, as always, would be greatly appreciated. Going from no computer experience to the xbox mod has been a pretty steep learning curve.
I have a Halo Edition 1.4 softmodded XBox that I'm trying to upgrade with a SATA drive. I bought a couple of the Kingwin adapters and I've tried about 6 different SATA drives with no luck. I've tried using both Hexen 2017 and Slayer to no avail. I've tried different 40 pin and 80 pi cables, pretty much changed out everything. Of the six drives I tested, I got one to format all the way through using Hexen but it will not boot the Xbox, just gives the standard error. I did lock the drive and backup the eeprom. I worked all day on this Sunday and frankly I'm about to throw in the towel. It's so painful trying to get new tech to work with old tech. I'm just looking for a little guidance, perhaps something simple I missed. Also, is the a tut for removing the battery / clock capacitor? BTW, as a last resort I do have a Startech adapter on order.
So I recently put an xbox into a PC case, and now its fragging. I have some questions. Does every single mobo hole need to be secured for grounding reasons? I have 6 in and its very sturdy. the pads on the bottom of the PSU are also contacting the same metal as the mobo like in the xbox. Its possible one broke in the procedure but I was very gentle. Any info will help, thanks
Hi everybody, first time here in SO long. I've had a modded Xbox since 2003 which I just turned back on after I heard out about the clock capacitor problem. Mine was ok (I was able to remove it and clean up alright) but having it back on I've found the hard drive to be quite loud and maybe not running so great. I wanted to replace the hard drive but I'm not sure if my old Chameleon modchip throws a wrench into the tutorials I've been looking at. If possible the method of hotswapping the DVD drive with the new HDD and cloning the original drive seems easiest. Any suggestions before I start fumbling through this are very much appreciated! And I have all the stats on my current setup if needed. Thanks so much for the help!!
Board Life Status
Board startup date: April 23, 2017 12:45:48