Search the Community
Showing results for tags 'jewel'.
Found 4 results
Hi guys, I posted this on a few xbox groups and thought i'd share it here too. I basically remove the jewel, use a dremel to make a circular hole where the jewel was and then attached a round 800 x 800 pixel (3.4") lcd. The video is provided by a small media player such as the Sumvision Cyclone +2 but i am also going to set it up with a raspberry pi zero to save space. Using the small media player means having to lose the dvd rom due to space confinements. The interface between the lcd and media player is a HDMI to MIPI pcb with 50 pin flat ribbon cable, you can find them on most china electronics websites. The video is just some boot videos i found and stitched together. This media player can loop playback on start up provided the video is placed in a folder in the root of an SD card or USB stick named AUTOPLAY
HI, I bought the Halo 2 jewel from Chimeric system and would like to know if I must use super glue or is there another way to fix it nicely? The top case is ready with original jewel removed, I used sand paper and added a bit of spray paint to cover any scratches. Thanks,
This is a brief guide on how to change your jewel color. There are a few different ways to do this. There is NO quick and easy way to do ot that doesn't risk damaging your jewel. What you need Brasso or similar metal polish. A rag or polishing cloth some type of candle if you want to paint it then paint, color of your choice. and a whole lot of time/ Elbow Grease. First You'll have to take your jewel off your console, Not gonna explain this because there are several different methods that you can find elsewhere. Once you have your jewel off you'll need to clean the Black goop off. I forgot to get pictures of this part, But all i do is rub it with a clean dry cloth with my thumb till its all gone. Then you'll need to rub some candle wax into the letters of the jewel so you don't remove the chrome paint.. After that's done you'll need to get to work with the brasso. Its very time consuming (Took me about 2 or 3 hours working on and off) Just keep rubbing (Think of dory) lol Keep going!! I didn't get a picture of it once it was all clear, But you get the idea, Right? After you get all the green off you want to run the jewel under some Hot water to remove the wax, (I used some dish soap and a SOFT brush to help work it out faster.) After its dry you can keep it clear or add some paint of your chosen color. once its dried you can glue it back onto your console and Enjoy all your hard work..
Board Life Status
Board startup date: April 23, 2017 12:45:48