Search the Community
Showing results for tags 'can'.
Found 28 results
-
google was very unhelpful. does anyone here know?
-
i pulled one of these caps out of the board to test it. can someone look at the images and tell me if the caps are ok? fyi, i had to compress them to upload here. compressjpeg.zip
-
i just got my alladin chip w/ pin header and want to install it on a coma 1.0 xbox. can anyone give me a youtube link for the installation? all the vids i have found are for the 1.6 and it is different. what's a DO btw?
-
Hello i have a xbox with a almost dead hard drive and a dvd drive that works barely. The previous owner performed a tsop very long ago and that's why i believe that i can boot to hexen without the hard drive, also i saw some solder residue on the pads to unlock the bios protection. (Cleaned the old solder and bridged the points again) I have a 1.4 with a Windbond and focus chip, the main problem that i have is that i can't move the options in the Gentoox because my only working controller seems to be a fake controller or at least the original pcb was replaced with a generic one, someone told me on the Xbox-hq forums that i can just drop the bios file on C:/Bios . Can i boot HEXEN and ftp the bios file from there? Also what bios do you recommend? I can't decide beetween evo m8 or iND-BiOS.5004.67 Thanks for your time.
-
Hi all, I am new to the Xbox modding scene and I just finished bridging my 1.4 Xbox. Next step is to flash the bios but I wanted to run the Xbox Bios Checker, but can't seem to find a download site. Where can I find the latest version of Bios Checker? Thank you.
-
Hey guys, I was reading barnitos LPC diagnostic thread to fix my xbox (still working on it) and i noticed that the baldbouncer image's is incredibly difficult to read and see what pins he is pointing too. I decided to try and update it with a higher-res photo and color coordinate the pins the the corresponding contact hole but I need someone to double check (preferably someone who has done this before) to make sure I'm pointing to the right ones. Can anyone confirm that I've got the Pin #7 going to the right contact hole and that the contact hole for Pin #4 is the proper one? Thank you.
-
Can XBOX games be read in RAR format or do they need to be ISO format in order to transfer over by QWIX? OR can they be transfered over in another way to FTP and keep in RAR format and the XBOX can read it? -
The debug unit I'm waiting to receive (tracking shows it will probably get here Tuesday) has the potential to run any unsigned code without any softmodding or hardmodding is what I have been lead to believe, is this right? I can transfer over or boot from disc any .xbe, for example Rebellious Bullet an unreleased Japanese game that was discovered on a debug unit and uploaded to the internet? edit spelling and youtube link
-
Hi so I would love to play any games I can in 720 on the XBOX I recently hardmodded . Ver 1.6 Alladin xt 2 + chip stock HD . I have figured out how to play XBOX games in HD using XBMC for Gamers and was not able to play my KIXXX in 720 even though the setting are there. I select the option but it doesn't seem to "stick" as the resolution looks low. Maybe I cant play In 720 I don't know what I can and can't do with my basic setup. What are my limitations? Thanks.
-
So this is my struggle, I bought a japanese Sega Saturn model 2 more than a year ago. The power switch on it came completely destroyed. No refunds for me, because it wasn't the seller fault, etc. After 1 year of procrastinating, I tried to fix my Saturn. And believe it or not, I found the part I was looking for to fix the power switch!! I could not believe it, because I live in Chile, near the south pole, and an old tech geezer had the part I was looking for! I was so happy! I fixed it, so I thought, but I came down with the reality that now the PSU was completely dead. Aesthetically the PSU is perfect!! Nothing blown, nothing cracked, and nothing corroded. I already tried to fix it with the help of a great guy on Reddit, but to no avail. So here it is my idea, could anyone in this wonderful community spare with me a Saturn PSU? A PAL 220v PSU hopefully? I have in my possesion three 220v OG Xbox PSU's and one 110V American OG Xbox PSU. I could give any of those PSU's in return for a PAL Sega Saturn PSU, my PSU's are perfect and all working great! My best regards to everyone! You have always been great to me. Hector Hidalgo. -
please help me i have an error 13 on my xbox and i was wondering if can use a halo 2 iso burnt on a DVD to fix it
-
Hi, Basically I want to transfer files from my Xbox hdd and make a backup onto my PC. my Xbox has a sata drive installed via IDE to Sata adapter. If I was to just take out the Sata drive and hook it up directly to my PCs motherboard via Sata cable could I put the contents of my hdd onto my PC? Using xplorer or is that not a quicker way to add/remove games? Most people say ftp for everything I’m relatively new to modding any advice is useful thanks
-
Long story sort. I ordered a replacement 1.6 main board with its matching HDD off of ebay to replace a dead 1 I had. All went well until it was time to softmod. When I try to copy an audio track to the HDD it says "Unable to create new soundtrack. You have reached the maximum 100 soundtracks" I don't see any saved sound track so I don't see how I am over any limits. Is there any way around this? Any other way of hot swap unlocking the HDD. I have only used the hot swap method in the past and don't have any of the games with the exploits like 007 or Splinter Cell and I also don't have a xbox to USB adapter so at this time hot swapping is my only option. thanks
-
I have a dvd drive that reads disks but crashes because the board is faulty - can I take a working board from a dvd drive with a laser that doesn't read disks? And If so is it pretty easy to do - any guides? Thanks -
So I'm having a bit of a problem and haven't been able to find a solution. The disc drive is able to read discs. It can see that the disc is a game, and I can open up the disc in file manager to view it's contents. But when I try to load the game, it absolutely refuses to load. Tried burned discs on a couple different DVD-R vendors, and even original game discs. It's a phillips disc drive. It could be the drive going bad, but then I wouldn't think it would be able to read the disc as a game and view the contents of it. I guess for some additional information, current have ind-bios 5003 06, UnleashX for the dashboard. Tried cleaning the lens in the drive with alcohol. I'd like to be able to have it read discs in case I do something stupid and can fix it from the console with a disc rather than have to open it up to take the drive out and work on it form the PC. I'm hoping there's some way to fix it without just replacing the drive entirely. I have the tools to work inside the drive if needed.
-
I have 3-4 original xbox consoles - If I null the hard drives on all my xbox consoles will I be able to interchange hard drives between each console? I want to clone a nulled drive and put the clone in another xbox with a nulled drive - will this work? Thanks
-
Hi - wasn't sure where to post this and thought I'd post it here seeing as you guys focus on cases. I'm looking for the front facia part that says "xbox" and attaches to the dvd drive drawer. I fixed a drive that I thought was unfixable with a new rubber band and a good cleaning with alcohol. Now I'd like to find a replacement part in the UK - anyone able to point me in the right direction - can't see them on ebay or amazon. I have an original black xbox so I need the part in black. Thanks for any help.
-
Hi - I have a Western Digital IDE drive lying around that is definitely not lockable for Xbox - can I use it if I Tsop my v.1 Xbox? Thanks
-
Hi - I softmodded my xbox original five years ago and didn't use it much because of a house move. I took it out last night and realised that the upgraded 250GB drive is very noisy and sounds like it is dying. I upgraded before using Chimp. I am wondering can I use Chimp again with another 250GB hard drive or does the next hard drive have to be bigger than the 250GB drive? I have looked for an answer on google but all search returns related to upgrading to a larger drive from the stock drive - there doesn't seem to be anything about swapping a drive for another drive that is equal in size. Kind Regards
-
Re-flashing bios on dead aladdin x2 Plus2. Im not sure what went wrong but i tried to update the aladdin x2 Plus2 to the ind 5003 via Xblast ( loaded oh hdd ) The flash appears to be successful but after a reboot i got the 3 boots and frag. Now it appears the chip is dead.? Thankfully i had another X2 Plus 2 and using that i can boot again I thought maybe i could hot-swap the chip and re-flash the bad one. However when i pull the chip the console appears to freeze and video goes to black. Im running off a Hexe 0.99b11-22 heimdalls xbox engineerind disc to try and re-flash 1.6 pal xbox Any ideas if this is possible?
-
HI all, XtecuterX73 from emuxtras here. The nestopiax dev. Can someone please help me find this unleashx skin that used to be on allxboxskins.com? Here is the only link i could find to it. Now i know there is no picture for it but this is the best i could do since i had to use wayback machine . It was a skin from Treya87 called Oblivion Nights. I would really appreciate any help finding this long lost gem. https://web.archive.org/web/20071207164550/http://www.allxboxskins.com/vote-comment/vc.php?UID=11084&app=unleashx&display=yes There are many skins from this site that are long gone i think unless some people still them somewhere.
-
Is there a SNES emulator that runs MSU-1 games? I use SNES9Xbox v6b6.153, but I don't think it runs those.
-
trying to download a copy of hexen, says I need to make 3 posts first? please advise.
-
I have an softmoded xbox and want to hardmod it and do not know if I can . I also want to replace the hdd with a bigger one .
-
Hi. I ordered a Monster Cable Lightwave 100X Optical Cable from eStarland to connect to the Monster Cable component cable I also purchased for the original Xbox but the dunces sent me just the 10' Monster Cable optical cable and no toslink adapter to connect it to the component cable so I can get 5.1 surround sound with my OGXbox. Is this a standard toslink adapter that is readily available or is it one of Monster Cable's proprietary monsters? In either case, where can I get one? Thanks for any help. ETA: added photo of what the toslink adapter looks like, btw.
Board Life Status
Board startup date: April 23, 2017 12:45:48