Search the Community

Hello, I was flashing the xbox version of the tsop 256 kb with the plug, half finished the process and after this the screen is black. I installed the xchanger chip, the console works, is there any chance to repair the tsop? Regards

After a Tsop and 1tb HD install - I had Ninja Massive, a few Xbox games and Emulators working fine. This morning I go to power it on, everything looks fine but it will not Boot any of the above mentioned. Loads for a few minutes and returns me to UnleashX Dash. I cleared the cache and don't know what else it could be. Any tips or help with this is greatly appreciated ;(

xbox boots 3 times no image or audio i found this xbox the way it is i think its missing a cable to activate the chip ! maybe someone knows where i can buy the cable if not its up for sale shipping outside europe is expensive has 120gb hdd

Hey Gang, 14 year old hard modded XBox and 8 year old soft modded XBox finally died. Have not been in the scene for a long while. Couple of questions: - What would you suggest for the newest ultimate build? - Is there a company or someone that you would recommend to do custom mods, case, system, everything? Thanks for add!!

Ok this is really frustrating. The xbox flashes green/red (restarts 3 times). And I can't figure out what I've done wrong here. I felt like the job went really smooth. I have also cut the trace near the xbox chip (so it cannot boot from the xbox's bios anymore, right?). I tried desoldering everything, replacing the wires, removing unused pins, adding them back. Grounding D0 (Even though I cut the trace, I decided to try). What else can I try? This was my precious crystal xbox too, and was excited to get the job done Edit: I tried the Aladdin modchip in a 1.4 Xbox, and it worked just fine there. I also checked continuity on the lpc rebuild, and it seems to be fine. No shorts. Did I get any of the wires wrong?

hey everyone, i replaced the cap in my 1.6 xbox and also finished the modchip (atleast i hope i did) and before i hooked up the dvd drive and hdd i tried to test it but all it does is come on and then go off and it does it twice and then on the last time it comes on and flashes red and green over and over, the mod chip has a orange light on and i am also attaching some pictures of my wire job let me know if i did something incorrectly EDIT: i looked for a different diagram and found i had done two wires wrong and now it is booting perfectly!

I've been asked about hot to internally install my HDMI mod into an Xbox. Well i finally found the time and did such an install properly! As i don't like soldering wires all over the place i went a different route and made it a permanent install replacing the original Video Connector. Cause who would use an old composite cable if you have an hdmi out right? Audio is provided through the HDMI signal of course and it supports 5.1. And with the 3D printed plate to cover the rest off the opening it looks perfect in my eyes. And the best part it does almost not need any modification to the Case! Well except trimming a tiny bit off the DVD caddy so it doesn't touch the PCB. The PCB itself does fit into any revision console and is relatively easy to install. Any thoughts about the install?

Is there a place where I can get an upgrade for my old xbox? I was looking for one those freidmtech dream series, but to my bad luck their website is Offline? is there any possibility to get and upgrade console somwhere else? ebay doesn’t have any. Thanks for any possible replys.

How would you go about replacing a hdd in a dead xbox? mod chips? I've been looking for a tutorial but I can't find anything. Also, everything on the xbox seems to work, so but the hdd is just freaking out with sound, so I assume its the hdd 1.0 btw.

recently got a debug kit I have been trying to look for ways on how to FTP 2 debug kit. The only media this would read that will allow you to FTP is the dashboard Avalanche. These were made on the Old Source codes that's why it can read it. But you really want the Alpha version it's a special version (Alpha v0.49.1) This is the only Dash or program this debug kit will play. Once it boots up go into file manager using the CD to get there. Copy files from DVD drive into the E partition you can make a folder call it apps and place individually everything on the contents of the CD you made... once that is done you can reboot the system open Avalanche go into FTP settings. You want to change your IP address to whatever you have on flashfxp or Windows .. once you are linked you can pull off any programs that you want to make a copy for yourself. Another thing you can do is download an app called retail game loader V 1.20. This app will allow you to play retail games as well as emulators or anything the original Modded Xbox can play. How you use it is once you FTP to hard drive and is complete reset the system then under xdk launcher click on the newly installed app retail disc loader V 1.20... once that is launched it will look like the exact same Dash except now you can load anything you want. I was giving a lot of help from a lot of different sources in order to make this post to this form. Please if you know any other tricks leave a comment below if not this will work for sure I've tried it myself 100%. Thank you very much for reading have a great Frankie d

Hello everyone! I recently picked up a box with Xkiller Xecuter 2 and while trying to make a USB cord for it, I somehow fried the circuitry for port 2. I had another box for spare parts and tried swapping the headers, no luck. My real questions are A: Do they make controller hubs (like a 2 or 4 way splitter) that I can just plug into port 1 so that I can still have a 2nd controller detected? I've searched everywhere and couldn't find one and if not B: Can I just splice the wires (on the internal plug) that go to port 2 on to the wires for port 1 and still have it see the second controller when plugged? I'm thinking so since it is just a USB interface... But I would love some input before I try.

i have a used xbox that i bought just recently paid 10 dollars was softmodded with soft mod deluxe v3 and have a code 21 the sticker that says the year has been wiped clean and i cant make out anything on it if anyone can help i would appreciate it is their any way to put it back to original the xbox and the softmod it then tsop flash it back to the original xbox software

hi i just bought a xbox that was soft modded with soft mod delux v3 and im trying to open up in original xbox dash board but theirs nothing their givers me a code 21 can any one help me i dont know where to start with this

here are a few custom case mods made for a customer.all done with airbrush and dremel tool all cuts are done by hand. ravens case mod cowboys case mod and this one just for fun tiger

This was made for a customer it was done by padhacking and made from scratch.he wanted a fightstick to use for his fav arcade game wrestlefest.the case was made from oak and plexiglass and the artwork was done with gimp.check out the video for the full build and subscribe to my youtube page will be posting some cool tutorials soon.Wrestlefest fight stick

I made this a while back.it was made out of stuff i had lying around.it has a modded xbox that has alot of hardware mods done to it.i did a padhack for the controls.it has a internal wifi adapter and i modded a old wirless doorbell into a remote power switch.it can switch between the arcade controls and wireless logictec controllers.i also tsop flashed it and installed a 1tb hdd.check out the video for the full build and please sunscribe to my youtube page thanks. Marvel Arcade Cab.

Hello everyone, I am selling my Xbox Kasumi Blue Dead Or Alive console on eBay for a low price and just wanted to let you guys know: https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F183248898473 Happy to answer any questions you might have. Good luck. -Adam

Hey lads, I'm having a bit of an issue here. Recently softmodded my xbox and cloned a 2TB Hard Drive over. It has been working fine, I Ftp'd over some stuff and they run fine on the drive. So here's the problem. When I started my xbox today, my DVD Drive was working fine. Albeit I didn't stress test my Hitachi-LG, it immediately booted MechAssault which was in the tray. I've always had a sticky disk tray issue, so I keep a disk in tray so it will open. I Ftp'd over my stuff, moved to the new dashboard. The game also booted fine there. Then I booted DVD2Xbox, and this is where everything stopped working. I tried to rip the game and it failed, about 5 files in, said it had failed to copy over 100 files. I tried to see if maybe the App was just acting up. So I went back to my dashboard and tried to boot MechAssault. It went to a black screen, and then rebooted the dashboard. So... I kept going. I went back to Rocky's softmod dashboard, and when the disc tray initialized, it read MechAssault as the title in the softmod. Hit "Launch Disc", and... no dice, it boots back to the dashboard. A friend suggested maybe clearing the cache, so I did. After clearing the cache, I got the game to load, but first it went to a red patchy screen, and loaded 15 seconds after. I played a round of Grinder, but when I quit grinder... black screen, went back to dashboard. I can't stress this enough, it only stopped working the moment I ran DVD2Xbox. My fear is that I'll probably need to clean the laser, and if it doesn't work, it may mean I need to get a new drive. I couldn't unplug its power cable when I was softmodding [I was desperately careful], so I put it carefully on the table, It flopped over once, and I'm afraid that may be what has killed the drive. If anyone has any suggestions, please let me know.

I have an unmodded Xbox and would like to know if the following information I have learnt is correct if modding an Xbox. To softmod an Xbox you can use the Pal version of Splinter Cell Classic edition, Also you can buy an Xbox softmod kit (2018) - A usb/memory card pre-loaded with the files needed to softmod an Xbox which includes Splinter Cell. You plug it into your Xbox and install the softmod by following the instructions. Also I have 2 questions I would like to ask. 1st - Do you need to delete your game saves on your hard drive before you do this or can you leave them on the hard drive as I would prefer not to delete my saves on the hard drive. 2nd question - If you then change your hard drive to a bigger one after you softmoded your Xbox to a 2TB hard drive, is this easy to do, or dangerous to your Xbox, and how much does a 2TB hard drive cost (in pounds or euros if poss). If you need to know what Xbox I have it will be the 1st Xbox as it came with a Thompson DVD drive (but got changed to Samsung by Microsoft after it became faulty-just for info). Thanks in advance for any info and advice you can give me.

Hello all, I recently went to the Midwest Gaming Classic in Milwaukee (about ten years in a row now) and FINALLY scooped up an original Xbox with a few games. I quickly upgraded the HDD and here I am with it softmodded and looking at all it can do. I am most interesting in some cool case/appearance based mods too if anyone has suggestions. The case is not perfect, and I really wouldn't even mind just a clean OEM shell...

Hi, I've managed to swap out the 200GB hard drive on an old Xecuter3 modded Xbox and I've got it to boot to UnleashX, but I'm not sure about the formatting of F: and G. I've tried both setting it to around 927GB for each partition and also tried F 120GB G 1734GB but I seem to remember there are some issues with hard drive sizes and partitions. How should I be setting it up to avoid any data loss as I load up games and apps? Thanks for any help.

My XBOX turns on and works but the green light around the eject button does not come on. The system is a 1.0 version and has been successfully Tsoped. A red light comes on around the eject button when booting with the Helen 2017 disk, but I don’t ever get a green light under normal operation. Any idea what would cause this or how I can fix it? Thanks.

It's begun, the thinning of my Xbox collection. Blue/silver , colour change led, larger drive, etc £90 plus a years free IPTV is not a bad deal as I didn't pay anything for console years ago as it had a sticky drive lol. my red /silver be going soon,

I believe my Xbox is a 1.6 - it has the Xcalibur chip. Correct? I purchased a new power cable for the unit. It still does not power up. I ripped it apart and it looks like there is a short on the power supply board. Does anyone know where I can find one for sale for the 1.6? or how to fix this? Picture below. Hopefully the pictures are clear. What else could the issue be??? Your help is appreciated! I am planning to update and revisit this project from 10 years ago. Current Mods - SmartXX mod chip with 180gb HDD. (Nothing special)

Hello everybody, I am in the situation to do my first paintjob on the xbox. For that purpose I created a PSD-Mockup file, where you can change the colour of different parts on the Xbox Classic. I want to share this file to help you all out to see the results you are planning on getting, before you do the actual paintjob. You'll be able to do stuff like this with it. Current Version: Xbox_Mockup_V1.rar Includes: - Xbox console mockup Planned in upcoming versions: - compatibility test with GIMP - Xbox controller mockup - Xbox jewel smartobject (in case you want to replace with your customized jewel) - Controller ports LED lights Feel free to use and share. Also feel free to give me some feedback on what I should work out/should be added and post some pics of the mockups you created :).