Search the Community

Took me 2 days to get all the wiring right. for the wii2hdmi for og xbox modd ... using a wii2hdmi device ordered off eBay you can also find an Alibaba and other places like this. Very inexpensive around 5 Canadian dollars. You're also going to need some sort of a donor Xbox RCA wires or component wires in order to pull this off. There is 11 connections total five of which are ground I do not suggest not adding all the ground cuz could cause interference. Had pretty good luck I made to both of them are crystal clear with no interference. I tested on version 1.0 as well as version 1.4 turned out very good. I tried to look up and down online for some sort of schematic nothing appeared. There was one picture that was in Spanish but it was misleading I tried to look into it to find out who the original inventor was found the person at XB Classics a Brazilian site. After conversating with him he told me that he had better pictures but he would not share. Then I noticed a site that they has linked where they were selling these to the equivalent of 40 US dollars a piece so that is the reason the images that they uploaded are just there to confuse people. So that they cannot make it. Does not include audio left or right. And apparently La stands for 5 V? Don't ask me but that's what the guy told me makes no sense at all. I spent two days getting the wiring correct. I documented everything and put it on a YouTube video (link2come) was trying to figure out the best way to make this readily available for everybody in the world any Xbox Enthusiast should have a low cost HDMI adapter solution available to them this is where these schematics come in. Again I didn't notice any interference at all. Just a little bit in the Bios when only running 480 but there's not much you can do unless you re Flash the BIOS to force. I've noticed people in the group posting pictures not even having soldering skills and getting very good results from this method. In theory you can use this exact same adapter in order to have an internal HDMI solution. These images are water marked because these are going to be the only good images that are online and I seen the way XB classic does their water mark and it really bugs me that they did that so I wanted to make sure that everyone knows where it came from. That being said I'm Mister James Reid really helped me out with this he volunteered his services in order to take my hard copy drawings that were on paper and make it look something presentable. Which he did and he did a great job thank you very much James I did in fact alter the images to have the watermark across them. Sorry about that but I figured since I put in the work I deserve to have my name on it. If you have any questions please do not hesitate I do not check this site every day but I do come in from time to time. Thanks again and I hope people online can use this receive money from the big corporations like pounds and hyperkin charging ridiculous amounts of money for something so cheap... I've also got a lot of questions recently about people asking if this is any better than component. It uses the component wires in order to transfer the signal into HDMI. I'm not too technical with that end but when looking up the chip number on the actual board for the Wii to HDMI adapter I did notice in there schematics and their breakdown for the actual board they did mention that the video board that does the decoding actually does video on hand splint what kind of video enhancement I have no idea. But it should be an enhancement over component if they are speaking the truth. Anyway gentleman without further delay here are the schematics. I hope this hope somebody somewhere. Thank you very much Frank

Remembering back to when I purchased my first Xecuter 3 mod chip, I was annoyed to discover the bank switch did not come with it. Payed the price for getting a used one, or at least making sure it came with everything. I looked all over to see if someone could help me jumper connections so I could use the different banks available to no avail. Finally I bought one new, which is not a choice nowadays. So I am dissecting switches and making schematics for each, starting with the most popular Xecuter 3. I have already mapped out the Xecuter 2.2 Pro and Xecuter 2.3b and will make a .jpg for them as well. Not being familiar with the programs used to edit pictures and make these, it took me 3 times as long to make this one schematic than it took me to test and map it out. I'm saying this in hopes I won't get flamed for poor work, I just want to help. Let me know what you think.

Hello i'm looking for wiring diagram of power board Version 1.1 year 2002- 220 volt Classic xbox, help me! Please

Posted this on the FB page as well: Purchased a used box. Previous owner couldn't get it working so pulled the mod chip out. I can't seem to find the installation manual/wiring diagram for the chip. Checked archives, OGXBOX, reddit, Google, and nothing. It's an Xecuter 2.0 pro. No dip switch/lpt daughter board, but I was able to get the chip working. It has the 2 pin plug tagged to ground, and the other wire, which I am assuming goes to d0, but is also spliced into the controller 1 USB daughter board. It was pulled apart, but splicing it back together boots the chip. I did a couple x3's back in the day and recently did an OpenXenium. I have never had to splice into USB. I am assuming it's for power. But d0 needs to be grounded to boot the chip. Haven't tested with a meter yet, but I feel like it's sloppy and just not right. Hoping one of you fine people can help. Pulling it back apart today to pull the clock cap and clean it up, so I can post pics if needed. *Edit. Pulled apart and added pics. There are two splices, one to add length to the d0, and the one that is spliced to the USB is running to pin 13 (mode 3) on the AV socket and doesn't go to the chip at all. Some kind of trace repair? https://imgur.com/gallery/nASUVhI

I was looking at the typical Aladdin XT 2 Plus modchips that are still available/being produced for the Xbox a while ago, and I thought to myself that the wiring to permanently ground the BT pad seemed a little inelegant. I took a quick look at the traces on the PCB and lo and behold, they trace back to adjacent pins on the Lattice CPLD chip! Going forward should I ever need to install another XT 2 Plus, I'll forego the wire and just bridge those two pins.

My start at Collecting the info on LCD installation utilizing different modchips and other means. These take me hours to create so I hope they help a few people.

I've installed some aladdin chips and wired them by soldering the "BT" point to the ground pin on the Xbox LPC. I figured that would be the same for the Duox2 lite chip, however I found a couple pictures online showing that the "BT" point on a Duox2 Gs chip (Dual Bank) was soldered to pin No. 9 of the LPC which is 3.3v. I just want to be sure that I'm soldering the "BT" to the right point on the LPC in order for it to always be powered on.

Came across a beautiful selection of wiring diagrams for a bunch of commonly found mod chips. These images are in high-quality HD very easy to read can be downloaded and zoomed in to read perfectly. I am not the Creator of these pictures. The Creator is YouTube channel techno on top. This person normally does Xbox mods on YouTube. There's a video where he shows each of these pictures for 1 minute. I merely took a screenshot of each. Thought it would help out the community here. In any event I hope somebody could use these images. Please pass them around and enjoy Wiring Diagram More common Hardmod Chips.7z

Hello everyone! I recently picked up a box with Xkiller Xecuter 2 and while trying to make a USB cord for it, I somehow fried the circuitry for port 2. I had another box for spare parts and tried swapping the headers, no luck. My real questions are A: Do they make controller hubs (like a 2 or 4 way splitter) that I can just plug into port 1 so that I can still have a 2nd controller detected? I've searched everywhere and couldn't find one and if not B: Can I just splice the wires (on the internal plug) that go to port 2 on to the wires for port 1 and still have it see the second controller when plugged? I'm thinking so since it is just a USB interface... But I would love some input before I try.