Search the Community
Showing results for tags 'turns'.
Hey Guys! new member here but used the site for research a couple of times and seems like a great community here. I have a og xbox debug kit that turns on but gets stuck on the xbox logo after the animation. it doesnt load into the dashboard/xdk launcher. Would anyone know the cause of this? None of the seals have been broken so i dont know if i should take it apart or not... Any help or insight would be greatly appreciated. Thanks in advanced!
Hey everyone, I'm having a problem with an original xbox that will turn on, with a solid green light for a second, then turn itself off. Then back on with an orange blinking light, then turn itself off and on again until finally staying on with a blinking orange light with it's fan running what I think is full power (haven't confirmed this). I can open the disc tray when in this state, but I can't power the xbox off unless I unplug the power from the back. I opened up the xbox. I believe it's a v1.2 motherboard. It was in pretty good condition I thought considering the original owner said it sat in a closet for the past decade or so. This xbox was not modded. I read that an orange blinking light could mean the xbox was overheating, which would explain the high fan speed. So I removed the old thermal paste, and added new thermal paste, put it back together, plugged it in, and the same issue is happening. I have tried a brand new A/V cable and power cord that I bought on amazon and that didn't seem to make a difference. Does anyone know what an orange blinking light and this sequence of powering on and off mean? I can't find good documentation on it anywhere. I'm also looking to try anything else at this point if you have any recommendations. Here is a link to a video of the symptoms described above and some pictures of the montherboard. Thanks for any help in advance! https://imgur.com/a/7hMZWFn?
Xbox turn on by itself after plugging to power mains. It is modded with alladin chip oldskool original. Tried different power supply, same thing, i had disconnected power button, controller ports, still, problem remains. Board looks clean. What could be causing such thing? Thanks.
Hey guys, I'm trying to find the problem of this Delta psu, it's a us 110v psu. I turn it on, and after some time the console turns off. If I try to turn it on again, it does, but it turns off in a shorter time. It goes like this until it doesn't turn on anymore. If I unplug it and wait some time, it goes back to working until it decides to turn off again. I've checked all caps and all seems to be in working condition. This psu has been repaired before by someone else before I got my hands on it, the fuse has been replaced and the old varistor left some black fumes around it. There isn't any visible damage on the components. Any tips? I just noticed I created the thread in the wrong section. Sorry about that
Board Life Status
Board startup date: April 23, 2017 12:45:48