Marty
-
Posts
398 -
Joined
-
Last visited
-
Days Won
9
Everything posted by Marty
-
~~~ Bowlsnapper noises intensify ~~~
-
You should probably try to find a local modder or someone that has experience in console repairs.
-
Just to get this out of the way....you did an LPC rebuild, right?
-
You shouldn't have to do anything. If you installed the chip correctly, it should boot up Cerbios (which I assume Snapper shipped with the chip) when you press the power button.
-
It would probably be easier to sort out the Open Xenium....
-
How much stuff could you possibly have on a stock drive?
-
Is your modchip flashed with Cerbios?
-
Which guide did you follow for the installation?
-
You'll have to admit, it's a pretty niche pursuit. Of course, you can be a pioneer and solve this puzzle then bring your results here.
-
This sounds very familiar....
-
Maybe they have a forum for discussions on compatibility somewhere. I would try asking around Reddit or something.
-
The controller needs to be xinput compatible. See if you can find anything on the spec sheet.
-
64cm is close to 24" so I'd go with that. Lots of opportunity for folding and cable management.
-
Original Xbox arcade stick repair
Marty replied to TheXboxMessiah's topic in General Xbox Discussion
Have you tried cleaning it? -
replacing a bad tsop chip on a 1.0 with a tsop from a 1.1
Marty replied to christopolis's topic in TSOP Flashing
Temporarily install a modchip and see if it will boot that. Rule out possible errors. -
You can't flash a bad BIOS to the TSOP if it's not write enabled. Your problem lies elsewhere.
-
What molex cables?
-
Finding a donor MCPX and do a hot air removal and reball. Not easy....not cheap and not worth the trouble. You'd be better off just finding another XBOX.
-
That happens more than people realize....and it's not a reasonably simple fix.
-
Have you tried reflashing with a different BIOS? Try UDMA2 first, then go up from there.
-
It looked like much more than that. No wonder they were so out of spec.
-
Which mod chip are you going with?
-
Yep, found it... https://github.com/Ryzee119/AladdinLCD
-
Using 360 and PS3 controllers, I'm not noticing any significant lag.
-
Snapper, you should put together an ogx360. It's a fun project and I think you'd quite enjoy it.
Board Life Status
Board startup date: April 23, 2017 12:45:48