suwuj12
-
Posts
48 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Calendar
Store
Posts posted by suwuj12
-
-
I'm trying to post pictures but for some reason I am not able to delete current images in order to make room for more since I'm over the limit... I will leave links here from my Instagram page... FYI shipping cost will be an extra $10 w/ insurance
-
Just got back from a small trip... I will post pics rn @TEK Nemesis @patrickjburt
-
1
-
-
Selling a tsop'd v1.2 mobo w/
ind-5004 bios & 128mb RAM upgrade...
$80
-
Selling a tsop'd v1.2 mobo w/
ind-5004 bios & 128mb RAM upgrade...
$80
-
On 3/3/2019 at 1:49 AM, fox said:
What's going on with all those other yellow wires in pic #2?
All those wires are for attaching the PCB signals to a custom arcade panel I just finished building
-
On 3/2/2019 at 1:10 AM, KaosEngineer said:
Your switch is a normally open momentary switch installed in the controller. One side of the switch tied to ground and the other to the yellow wire in the controller cable.
I have that done but what I am not fully understanding is in regards to working on the mobo for this mod. Specifically the (red wire) that must be soldered to the 2 pin & other end gets soldered to the stripped yellow cable of controller port 1
-
19 hours ago, neighbor said:
this probably was the trouble
inspected everything resoldered every capacitor and resistor in the ram area, now it booted. oh yeah, the tester is your friend.
CASE CLOSED.Glad the info help you solve the dilemma with the RAM... Xblast's RAM tester is definitely needed to trouble shoot...
-
1
-
-
How did you solder the RAM? Each leg individually or drag technique with the appropriate solder tip?
If u dragged make sure u didn't accidently remove or bridge any SMT component next to the RAM pads if u look closely u can see that there are tiny resistors by the pads
-
1
-
-
What was your source for the extra RAM ?
I also just recently tsopd a 1.2 mobo w/ IND Bios 5003 & did the RAM upgrade & had no issues... Did the system work before the RAM & tsop? If u removed all the extra RAM u installed & cleaned up the pads from any bridges, then the only thing in mind that I think it could be is either a bad tsop flash or random solder splatter from installing the RAM...
-
1
-
-
Thats what i did,, 3rd picture... i disconnected yellow wire from the xbox, extended it with red wire and soldered it to the 2nd to last pin on the mobo... Am i missing something?
-
Tried this on a v1.2 mobo but didnt have any success... Is this info bogus or am i missing something? I would appriciate any input. I attached the instructions that i followed..
ttps://www.google.com/amp/s/synapse.wordpress.com/2006/10/26/xbox-controller-power-push-button-mod/amp/
-
@TwiSteR located in the U.S
La Puente, CA to be exact
@Xbmcmodsforxbox yes but only of my personal 1.0 system, all others go out the door once i finish so i havent really bothered with pictures
-
Doing 128mb RAM upgrades for $50,, pm me if interested
-
5 hours ago, neighbor said:
tried to play Halo? because the panel has both sticks.
I removed the second joystick(blue), once I figured out that wiring an analog stick to a 8 position joystick is not possible.. maybe if i found an analog joystick?
I wish i could play halo on this panel. That would be awsome!
-
1
-
-
Made an Arcade control panel using an original Xbox Type-S controller PCB
Followed the wiring schematics from http://slagcoin.com/joystick/pcb_wiring.html#PCB_DIAGRAMS
And came up with this design...
The 2 momentary black push buttons are left click (LC) and right click (RC) & the red one serves as an ON/OFF button.
At first I thought I would have both left & right analog stick control , but that was not very feasible, at least for me( input welcomed if someone has wired up an analog control for an og xbox controller?) ... So instead I went with the d-pad for movement control.
If there is enough interest I wouldn't mind making a build video for another one.
Hope you guys like it!
Thoughts & input welcomed
-
5
-
-
@Forlorn Penguin Got it working man! thanks for the password tip! Controllers were definitely not the problem.
-
Im not using OEM controllers, I am using gamestop wireless controller, could that be the problem ?
-
I actually ended up downloading it from this website after the 3 posts I made, thanks though!
btw I do have a question if anyone has the time to answer id greatly appreciate it.
Im trying to do option 3.5.3 New Disk, NTSC Xbox on Hexen but the problem is
Ive typed the correct password several times, but i keep getting the message that it is incorrect?
Can you please help me, thank you so much in advance!
-
I hope this is enough
-
but i have to have at least 3 posts
-
Im trying to download this file
.jpg.573af237857fd3087a165d9f0fa5c3c1.jpg)
Board Life Status
Board startup date: April 23, 2017 12:45:48
1.2 Mb Tsopd Ind 5004 & 128mb Ram
in For Sale
Posted