Jump to content

Welcome to our site

Take a moment to join us. You can sign in with Facebook with a couple of clicks. No need for a lengthy registration. We also have Tapatalk support so you can use this forum on your phone the same way you use facebook. It will keep you notified.

Sign in to follow this  
ironsniper1

Unleashx and Hdd Space

Recommended Posts

hey everyone i did a search and couldnt find what i was looking for, but i have a chipped 1.4 xbox and just upgraded the hdd to a 1tb sata and my F drive is supposed to show whatever its supposed to show i cant remember the number right now maybe 900gigs or something, anyway unleashx only shows 123mb for F and yes i did combine the F and the one below it to make it the biggest and it shows up correctly in xbox partitioner but not unleashx, is there a fix for this?

Share this post


Link to post
Share on other sites

XBpartitioner is just finicky sometimes. The only thing you can do is keep trying and eventually it will work. One thing that seems to help is to first format it in some way that you don't actually want, exit and launch XBpartitioner again and reformat it how you actually do want it.

  • Thanks 1

Share this post


Link to post
Share on other sites

I had this happen to me on a 250 gig drive. Only had 127 gb free and seemed weird. I had to reformat and made an f and g drive then size was correct. I personally couldnt get it to work for just F drive. Either way, technically wouldnt matter can still put anything anywhere on f or g.

Share this post


Link to post
Share on other sites

I am thinking this is the issue when I launched XBPartitioner 1.3 it showed- LBA48 info not found! After pressing (Y) to continue, across the top XBPartitioner shows "LBA48 patch v0" and it says to upgrade to a bios that supports it, I have a Aladdin X2 chip that I installed like 3 or 4 years ago maybe a little longer, could this be the issue and if so should I use hexen boot disc to try and upgrade the bios on the chip? I do have a spare if something goes wrong

Share this post


Link to post
Share on other sites
29 minutes ago, ironsniper1 said:

I am thinking this is the issue when I launched XBPartitioner 1.3 it showed- LBA48 info not found! After pressing (Y) to continue, across the top XBPartitioner shows "LBA48 patch v0" and it says to upgrade to a bios that supports it, I have a Aladdin X2 chip that I installed like 3 or 4 years ago maybe a little longer, could this be the issue and if so should I use hexen boot disc to try and upgrade the bios on the chip? I do have a spare if something goes wrong

Did you install the chip yourself?

if so did you flash it using flashbios with the proper version set for your xbox ?

Share this post


Link to post
Share on other sites

No all the guides I read at the time said to install it and that’s it and it worked like a charm for a long while with a 250gig ide hdd but recently I decided to upgrade to a 1tb sata and yes I installed it myself

Edited by ironsniper1

Share this post


Link to post
Share on other sites
49 minutes ago, ironsniper1 said:

No all the guides I read at the time said to install it and that’s it and it worked like a charm for a long while with a 250gig ide hdd but recently I decided to upgrade to a 1tb sata and yes I installed it myself

i aint sure but i believe you have to upgrade your bios

however im not an expert i just follow guides and figure things out like you and eveybody does , i suggest you wait for a better reply and dont use cheapo adapters make sure your jumper is set to the right pin

goodluck homie

Edited by Sprayizm

Share this post


Link to post
Share on other sites

You need to reflash the Aladdin XT PLUS2 modchip after installing it. The BIOS that comes pre-flashed to that chip is EvoX M8+, which is a fine BIOS, but the default configuration for it is terrible and does not support the larger HDD partitions. It also forces the need for a DVD drive upon boot, which is a pointless, retarded restriction.

You'll want to create a new configuration for EvoX M8+ that disables the DVD drive check and enables larger HDD partition support and then reflash your chip with the newly created .bin file.

Use Please login or register to see this link. to create a custom EvoX M8+ .bin file.

Edited by Forlorn Penguin
  • Like 2
  • Thanks 1

Share this post


Link to post
Share on other sites

As of HeXEn 2018, the DVD drive check for EvoX M8+ is now disabled. As for the HDD support, the F only version should be fine for you, since you only have 1TB. You only need a G partition for a 2TB HDD.

Of course, you can always still open the file in EVTool anyway to completely customize it to your liking. Like removing the ugly EvoX logo from the bootup animation, for example.

Edited by Forlorn Penguin

Share this post


Link to post
Share on other sites
On 7/15/2018 at 11:37 AM, Forlorn Penguin said:

As of HeXEn 2018, the DVD drive check for EvoX M8+ is now disabled. As for the HDD support, the F only version should be fine for you, since you only have 1TB. You only need a G partition for a 2TB HDD.

Of course, you can always still open the file in EVTool anyway to completely customize it to your liking. Like removing the ugly EvoX logo from the bootup animation, for example.

awesome when i get the chance i will try it out and let you know how it goes

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

Board Life Status


Board startup date: April 23, 2017 12:45:48
  • Similar Content

    • By LinuxArcadeGuy
      Hello all! here is my Softmod Tutorial...!
      Originally made in 2006, uploaded to torrents, updated and reborn in 2018 as an OGXbox.com Exclusive!
      anywhore... its written in an easy to follow "noob-blog-style" just in case you are wondering why its so lame...
      UPDATING FILES FOR DOWNLOAD!!
       
      also additionally here are some essential xbox tools for modding/softmodding that are extremely hard to find these days due to most xbox scene sites and forums being dead. I have had them for over 12 years on a unused backup drive.
      UPDATING FILES FOR DOWNLOAD!!
       
      As always all files have been scanned for security threats by VirusTotal.com to rule out any contamination, with the exception of one false-positive in "Xplorer360 v0.9 Beta 6.zip".
      ** Keep in mind that these tools were made on and for xp/7 32bit windows, they may or may not work or work properly on 32 or 64 bit win 7/8/10, I recommend win xp/7 32bit virtual installation via VMware or virtualbox.
      Enjoy!
       
    • By Charles Michael Rondon
      Hi. I’m new to the community.
      I’m KaRMiG, from dominican republic.
      retro console enthusiast, 
      I hope to gain a lot of friends and contribute to these forums in any way I can.
      thanks for reading! 
    • By Frank D'Agostino
       recently got a debug kit I have been trying to look for ways on how to FTP 2 debug kit. The only media this would read that will allow you to FTP is the dashboard Avalanche. These were made on the Old Source codes that's why it can read it. But you really want the Alpha version it's a special version (Alpha v0.49.1)
      This is the only Dash or program this debug kit will play. Once it boots up go into file manager using the CD to get there. Copy files from DVD drive into the E partition you can make a folder call it apps and place individually everything on the contents of the CD you made... once that is done you can reboot the system open Avalanche go into FTP settings. You want to change your IP address to whatever you have on flashfxp or Windows .. once you are linked you can pull off any programs that you want to make a copy for yourself. Another thing you can do is download an app called retail game loader V 1.20. This app will allow you to play retail games as well as emulators or anything the original Modded Xbox can play. How you use it is once you FTP to hard drive and is complete reset the system then under xdk launcher click on the newly installed app retail disc loader V 1.20... once that is launched it will look like the exact same Dash except now you can load anything you want. I was giving a lot of help from a lot of different sources in order to make this post to this form. Please if you know any other tricks leave a comment below if not this will work for sure I've tried it myself 100%. Thank you very much for reading have a great
      Frankie d


×

Important Information

By using this site, you agree to our Terms of Use.