Jump to content
OGXbox.com

IAmADrunkGuy

Members
  • Posts

    35
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by IAmADrunkGuy

  1. Hello It has been a while since I've messed around with Ninja and was wondering since I have a drive thats split into two 70 gig parts f &g how do I get lets say a folder with games in it to show in Ninja? So lets say I put everything in F drive but some games didn't fit how do I make those show in ninja? I saw no option to "scan" folders.... Thanks !!!
  2. Wish there was a 360 to og xbox converter. like a hdmi to dvi. I have several 360 comonent/vga cables laying around from my 360 modding/bulk buying days. Sadly only one OGxbox component. At least I have about a dozen A/V cables
  3. Not sure where to post this but wanted to let people know to check everywhere for lost items. I thought I looked everywhere for my og xbox component cables in my shed, video game extras totes, garage, ....but I wanted a coax cable and I knew I had one connected in my living room that wasn't being used. While grabbing the coaxial I noticed some component cables in the back and thought they were for a 360. I decided to take them off because I don't have a 360 anymore. To my surprise they were xbox component cables !!! I haven't had an OG xbox for over a year and a half!!!!!!! They're Original ones!! I think I giggled like a little school girl!!!!!!
  4. I've had several in the past and they've all been 1.6 which I'm fine with. Others seem to have issues with them and some games. I don't chip them so softmod 1.6 is fine for me.
  5. I'm reading all of this (http://coinops.ninja/readme-ninja.html ) to see if I can figure it out but thought I would ask anyway. How do I add the vison packs so they show in Ninja? I would assume copy everything over except for these items as stated in the read me : "Vision Packs are supported in NINJA. But you need to swap the 3 MyVideo.xml files located in \skin\Default\720p\ \skin\Wheel\720p\ \skin\Wheel Fade\720p\ with the corresponding one from \- Help and ShortCuts\- Common Reconfig Helpers\Full Animation Skins\skin\ ... \720p\MyVideo.xml. This enables all art possible in NINJA, Premium & Vision alike. You need to reboot NINJA however" Will try once I get home but thouht someone might have done it before and could shed some light. The packs I'm transferring are the ps1 shump packs, adults only pack and mario pack. I would assume it wouldnt be that hard just by looking at the other ps games I have in there and basically "mirror" what I already have working. I've also posted in the Back-ups.me , and the Coinops forum. Thanks !! EDIT: Figured it out, sort of. Just have to follow directions on http://coinops.ninja/readme-ninja.html lots to read but its all there. Did a couple of tests and it turned out ok but to add xbox games still have to get the "resources" to make it look professional/good which isn't easy if you have hundreds of games will probably only put the "good ones" in there. And I have to learn how to use gimp or some other editing tools to add the background with the cutout for the xmv preview......
  6. Yea me too. I try but I've gone above the limit many times only to be outbid LOL
  7. I have other xboxes but ....I used JB weld epoxy and this thing isn't budging. I have other tops but this one being my "baby" from back in the day it's quite sad for me...... I guess it really is custom now !! haha! But I'll check him out, always good to have extras . Any info on which wires are 12 volt? My multimeter broke and I tried looking in the forums but search didn't return anything. Nulled my HD though successfully, after a failed attempt on one of my hard drives, used config magic on it, on my 1tb used rockys and worked great. I'm cloning c and e on screwed up drive since I lost my ide to usb cord,.... PS: for those wanting to mod a case and dont have $$ to spend for dremil, I bought mine dremeled what I needed and returned it to Walmart, also got some leds (12v) strips from Ollies discount store for 5 $, and acrylic is cheap $3 and change for a 10x8 ish piece (probably bigger I cant eyeball measure and its all broken/used now). Paint was cheap as well used similar as recommended above with primer.
  8. Update: Painted a gloss black , plexiglass and jewel in as well. But one BIG mistake made.... I epoxied the jewel in.... UPSIDE DOWN!!!!! [emoji44][emoji35][emoji23]. Expoxy already set and secure as hell!!!! Nooooooooooooooooooooooooo . I do have a question though, is the hard drive power 12 volt? I need to splice in some 12 volt strips that I got for really cheap... Sent from my iPhone using Tapatalk
  9. I had this happen to me on a 250 gig drive. Only had 127 gb free and seemed weird. I had to reformat and made an f and g drive then size was correct. I personally couldnt get it to work for just F drive. Either way, technically wouldnt matter can still put anything anywhere on f or g.
  10. I bought one with no cables and works well for $6 in my hometown so no shipping. Also got another for $9 with $11 shipping. Good deals.
  11. I've only seen one video and it really looked good. They did their whole xbox though. It's nice to know there's "options" if one or two things don't work out! I'm still waiting to buy all necessary clear, paint, textured etc... until tomorrow, dam alcohol got in the way . Good thing is whichever paint/clear I do it will definitely be different and I will certainly be pleased with it . Being my first case mod of anything I'm sure it won't be perfect but it sure is fun.
  12. I'll have to check on how to enable synopsis never thought to check to see if it was enabled. . Thanks! EDIT: That was it just had to enable it. I couldnt find the setting but I had to press the black button while inside the plank preview pane ( white button > synopsis> blank page > black button.
  13. How do you get this at the time the vid starts. I've put the items from the dl in the correct folders just cant get it to look like the vid below.... I dont have any "synopsis" items there I'm sure that's where I'm fuorking up.....
  14. Thanks, still messing with it. All that's left is paint, well still sanding, not looking too bad but we'll see. I'm all set up with xbmc4gamers except for a few things sysnopsis etc... I was going to go ham on it (clear) to see what it looked like but had to cut my yard....and weed...and water all those fukin plants.... but I'm on it this weekend . Edit: If I have to Paint Im leaning towards the textured paint, saw it on a console and looked sweet. I won several xboxes at my local goodwill auction so If I have to chuck a top I'll be fine. Most likely wont have to though. I'll give em away to family if they're fine.
  15. Progress going good. sanded a bit and got it ready for plexiglass. Cut out dvd drive as well and also removed one of my HDs to give it a 1tb drive. Looks promising so far thanks to OGXbox.com and its wonderful helpful members. Still iffy on the sanding/painting but confident will look good. All I need now is to work on the configuration of the leds.... After I get all that done I have to work on getting xbmc4gamers to show previews, covers etc... but that's whats fun about it. Getting shit to work the way you want it to I take great joy in modding things...especially when they're mine ! and turn out well.
  16. Thanks for the info. I'm going to try sanding it right now and look for the paint when I buy sanding products just in case LOL.
  17. Sad to hear.....I havent seen any consoles painted up close but some look nice in pics. I'll try to sand the crap out of it first...looks bad then paint........worse comes to worse I'll use some of that textured paint or some bed liner spray!!!
  18. Nice I may give that ago, if I mess that up I can always paint it
  19. Just looking for recommendations for painting the X on the console. I was going to leave it original color but I scuffed it up when I was cutting the DVD window. It will have green LEDs so something to compliment it? I already sanded it a bit with fine grit paper and the scuffs although visible aren't deep, cant feel them when I run my finger over them now. I would like something to offset it just a bit from the original black. I thought about green as well but not sure. I've seen some photos on here but they're mainly blue or purple ish so dont really want that since I want green LEDs. Flat black? glossy hammered black? xbox green? I'm all taped up and ready to paint!!! Any suggestions greatly appreciated!!!!
  20. Did you guys find any suitable ones ? Or did you guys buy any on ebay? Just seeing whats possible since my soldering is a bit on the weak side and the less I have to do the better!! Thanks !!
  21. I was in the same boat looking for belts but didn't have time to wait, I didn't want to LOL. I went to dollar tree and bought the little rubber bands for girls hair. They seemed small but I figured I'd try and it worked LOL, They seem pretty thin so I put three on there and it works great. Probably wont last long but for $1 for 500 I cant complain!!!!
  22. I'll have to double check to make sure I was pressing twice, I would think I have been but maybe I just back out and don't. Thanks for the info!!!!

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.