Just a quick question to throw out to the community. I just did my first 1.6 LPC rebuild using a rebuild PCB. I`ve done many LPC rebuilds the old school way, just running wires to the appropriate points, but I saw these boards, so I grabbed a few to try out. I have mixed feelings about them. Yes, it was as simple as soldering the connections on the board to the point right next to them, and yes, they do look more professional, but did they save me any time, not really. With all the fiddling around trying to make sure all the points were exactly where they needed to be before tacking them in was a pain, and took way longer than if I had just run wires to where they needed to go.
What is everyone elses opinion and experiences with these LPC rebuild boards.
I got a used modded xbox today. As I am stupid, instead of reading much into it, I tried to update from Evox m7 to m8 plus. In the update zip I downloaded, there was not only the M8 bios, but also a file called flashbios_v303.bin. I thought that would be the right file to flash, so I did.
It seems like the bios is not compatible with my mod chip. While I am able to boot and select a file to flash from the HDD (I tried to flash an old file), it just gives me the error "Unkown flash! Halting".
Is there anyway to make flashbios write onto my modchip so I have a working bios again?
Board Life Status
Board startup date: April 23, 2017 12:45:48