Jump to content
  • Similar Content

    • By geohunk
      I messed up. Was fiddling around with configmagic trying to lock the HDD on my chipped Xbox 1.6 so I can transfer and use the HDD on my softmodded Xbox. I followed this guide here: https://www.biline.ca/xbox_uxe_hd2.htm 
       I was able to update the EEPROM as stated and locked the HDD so it can be used on the softmodded Xbox. That worked fine. But now my chipped Xbox turns on but no picture or video whatsoever. I don't know what to do next...
    • By Dougmeister
      It has literally been over 10 years since I've played it. One of the bootup screens says "Xecutor2" at the bottom, so that tells me that much at least.
      My main question is the three (3) dip switches on the front of the console. Someone else installed it for me, and I forget what each of them does.
      I think that the left-most one controls whether or not the modchip is active; you wanted to toggle that one off if you ever went onto XBox Live, I think.
      Can anyone help?
    • By calebTree
      I grabbed a Kernel file from this page and I flashed it with XBlastOS.
      Does the kernel have to match the original kernel? 
      What is the kernel relative to the BIOS? Normally kernel and BIOS are two very different components of a computer. I shouldn't have been able to flash the TSOP with the kernel correct?
      How are those kernels meant to be used?
      I was looking for the default BIOS.
      Thanks
       

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.