Jump to content

Board Life Status


Board startup date: April 23, 2017 12:45:48
  • Similar Content

    • By Vulcan_Zombie
      I installed a aladdin xt modchip and when I have the chip out of the system it powers on but when the chip is plugged in the system won't power on. Does anyone know the problem? 
    • By Verynormal
      So i got everything installed and i get the xbox trying to boot 3x (i can see the fan on the gpu spinning) then it flashes red/green and no more fan spinning on gpu but it sounds like my hdd is still going. No picture at any point. I had alot of issues with soldering the D0 point and if im being honest i dont know if its soldered to a proper ground or not i put it to one of the bigger square pads on the motherboard. Also when soldering the D0 point i coudnt get any solder to stay and i couldn't really even see the point anymore so i went above it to another point and scraped off some of the solder mask that was on it and soldered there instead, i was hoping that since it was on the same trace it would work the same but i doubt it works like that. This is the exact chip i used and its a version 1.0 xbox.  Please login or register to see this link.
    • By twiztid777
      og xbox 1.4ghz and ram upgrade anyone have one for sale let me know will pay high cash for one ok thanks
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.