Jump to content

Hdd Upgrade Questions


chrisrlink
 Share

Recommended Posts

hi so I did the following steps so far

1)softmodded my 1.0 via SC PH

2) I used rocky5's tools to null the eeprom then extract the nulled eeprom backup to my gdrive

ok so now I have a sata hdd (Seagate 500GB) and a kingwin SATAtoIDE board knowing that it doesn't have a master/slave switch by best option is to use xboxhdm i have a question first is there a way to burn the iso to usb boot instead of by cd?

and i want hdm2.0 that supports sata drives correct?

 

thanks for your help

Link to comment
Share on other sites

6 hours ago, chrisrlink said:

hi so I did the following steps so far

1)softmodded my 1.0 via SC PH

2) I used rocky5's tools to null the eeprom then extract the nulled eeprom backup to my gdrive

ok so now I have a sata hdd (Seagate 500GB) and a kingwin SATAtoIDE board knowing that it doesn't have a master/slave switch by best option is to use xboxhdm i have a question first is there a way to burn the iso to usb boot instead of by cd?

and i want hdm2.0 that supports sata drives correct?

 

thanks for your help

Hi, if you use Xboxhdm 2.3 you don’t need to burn a disk, here’s a link to a video using 2.3.

https://youtu.be/y_n8kEQfgdE

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Content

    • By Zombient
      I think this belongs here? Since I'm just trying to install XBMC4Gamers. But like the title says, Xbox Softmodding Tool Extras Disc will not boot when I try to boot it from the "Applications" section. I've followed the instructions on how to set up the files correctly, but when I click on XSTED, the screen goes black for a few seconds then it goes right back to the UnleashX dashboard. I thought maybe it's mounting it to the disk drive virtually? But even my disk drive won't boot a disk when there's a disk in it using the "Run CD in drive" button, no matter what's in the drive.

      I'm kinda at a loss, so I'm coming here for some help. Attached is how I have it setup on the drive.

      1.4 that's been TSOP'd, if it matters

    • By Head2Beast
      I was trying to upgrade my HDD with chimp but end of the sequence I can’t get pass the startup screen (without Microsoft logo). I tried xbhdm both disc and usb but no luck but Iooked at the HDD, C and E files is there but they’re empty. Btw i tried Hexen and og xbox installation discs but again doesn’t worked. I’ll add the board’s picture and you’ll notice that the chip is different and an odd one. I also have HDD’s eeprom.
       
      Is this situation salvageable or is it dead? I also have an non-chipped non-softmodded spare one as well. Thanks in advance.

       
    • By Tysonb
      Hi guys i have a problem, i just filled up my new hdd. When the dash loads it shows on f and g 0,0 free and when i go to file explorer it shows nothing in f and g.
      I put in the hexen disc and in hexen the f and g shows the correct amount of free space and all the games and emulators are appearing in the f and g and i can play the games.
       
      The xbox has an old Smartx chip
       
       

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.