So I recently learned a valuable lesson about TSOP flashing when I flashed my 1.0 with iND-BiOS.Beta.Feb-11-05.67.bfm.bin rather than the non-BFM version of the bios. I was wondering what the practical purpose of the BFM (Boot from Media) bios is, and how one would even use it?
I'm assuming it is a BIOS that something can load AFTER the Xbox as already booted and initialized all hardware?
I got a job lot recently of some consoles - and all of them have buggered Thomson drives 🙃
I've tried adjusting pots, tried booting multiple burnt copies of HeXen and OGXBOXInstaller etc. but all seem to just hang on the Linux screen.
Any suggestions for what can be done? Can a HDD be setup outside the console? I have FATXplorer - and I know Eaton was looking at adding more support for the OG Xboxes however I think these are all still in beta.
Cheers guys
First of all, thank you dear community for the oportunity to be a part of something good!
I have a strange problem, have xbox 1.4 with aladdin XS MODCHIP, an older modchip ,but nonetheless it is working,
As i want to upgrade to larger HDD, i pot-ed thomson drive, because it was failing, i put the 80 gb hdd, but i get error 13 and/or 16,
the problem is that hexen or slayers cant read dvd from the first try,and always it can read from the second,third,etc.Also reads backups and reads hexen and slayers from retail HDD.
Orange light is ok,evox sign is in the left-upper corner,it tries to read dvd hexen,but gets me to error 13 or 16 (this is only when i put blank HDD instead of the retail one)?
DVD TRIES TO SPIN 2-3 TIMES, BUT NO BOOT TO HEXEN OR SLAYERS DISC,THEN ERRORS FOR MISSSING DASHBOARD
Is there any solution to this?would appreciate very much,i could provide any information needed, THANKS IN ADVANCE
Recommended Posts
Similar Content
I'm assuming it is a BIOS that something can load AFTER the Xbox as already booted and initialized all hardware?
I've tried adjusting pots, tried booting multiple burnt copies of HeXen and OGXBOXInstaller etc. but all seem to just hang on the Linux screen.
Any suggestions for what can be done? Can a HDD be setup outside the console? I have FATXplorer - and I know Eaton was looking at adding more support for the OG Xboxes however I think these are all still in beta.
Cheers guys
I have a strange problem, have xbox 1.4 with aladdin XS MODCHIP, an older modchip ,but nonetheless it is working,
As i want to upgrade to larger HDD, i pot-ed thomson drive, because it was failing, i put the 80 gb hdd, but i get error 13 and/or 16,
the problem is that hexen or slayers cant read dvd from the first try,and always it can read from the second,third,etc.Also reads backups and reads hexen and slayers from retail HDD.
Orange light is ok,evox sign is in the left-upper corner,it tries to read dvd hexen,but gets me to error 13 or 16 (this is only when i put blank HDD instead of the retail one)?
DVD TRIES TO SPIN 2-3 TIMES, BUT NO BOOT TO HEXEN OR SLAYERS DISC,THEN ERRORS FOR MISSSING DASHBOARD
Is there any solution to this?would appreciate very much,i could provide any information needed, THANKS IN ADVANCE
Board Life Status
Board startup date: April 23, 2017 12:45:48