Jump to content
OGXbox.com

Report

  • Similar Content

    • By rmcelwee
      So, I'm an old man and I can't remember how I flashed this XBox years ago. I have an Aladdin XT Plus2 with Evox +3935 and M8plus_16 fan 40.06 (not sure what size bios that is). I wrote a 2TB image to a drive and get an error telling me to upgrade to LBA48 ver 2. Can someone point me in the right direction. I do have FTP access to the box.
    • By ironspyder1734
      https://www.amazon.com/dp/B06XFT1TPJ/?coliid=I34W0053FX96LE&colid=3BP1APT3T9SB8&psc=1&ref_=lv_ov_lig_dp_it
    • By johnyept
      I have 2 original XBOXes, one is v1.6 and I'll eventually add a modchip, and the other is a v1.2/v1.3. I finally got around to fix the corroded traces problem on the v1.2/v.13 by soldering 4 wires from a 80pin IDE cable, it looks much cleaner than using 4 stranded wires
      I added a used 1TB sATA HDD + IDE to sATA adapter + 80pin IDE cable and used Hexen 2018 or TruHexen 2021 (not sure which) which installed fine.
      BUT... I know the laser will eventually die and I want to have an alternative method of setting up an HDD, so I picked up a 2nd 1TB HDD and tried XBOX HD Maker 2.3 USB beta3, with the batch file modified to make it work with any connected HDD, not only USB. The steps I did were:
      - ran xboxhd.bat, option 2 (Launch xboxhdm), then within QEMU, option 1 (Build a new Xbox HD from scratch)
      - did NOT format partitions because it outputs "Error: out of memory" when formatting F: and then scrambles the entire output and menu, instead I went with option 3 (Format extended partitions on Xbox drive) + 4 (F and G splits space evenly), then 2 (Rebuild C-partition on existing Xbox-drive).
      When booting the XBOX with this HDD I get a blinking orange light and nothing on screen after the initial boot logo. If I use Hexen to install a Dashboard it works fine, so I know the HDD is correctly partitioned and formatted. The batch installs some files on the C drive, maybe these files are not the correct ones for a TSOPed XBOX?

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.