Jump to content
  • Similar Content

    • By DobaMuffin
      Hello,
      I am writing this today to see about getting some help with my 1.6 Xbox and the Xeceuter 2.6 CE installed in it. I recently did this Please login or register to see this link. involving a resistor to extend the life of the board and the board works fine after the install.
      This is also where I managed to find an issue. With the mod chip enabled, both banks load up their respective bioses, but when I disable the mod chip using the front panel switch, the console Frags after 3 tries. When I disconnect the LFrame wire from the mod chip, the console boots up like normal to the stock dash using the stock bios. Before the mod though, disabling the mod chip using the front panel switch worked liked normal.
      So now I am a point where I made a modification to extend the life of the console, but lost some functionality in my mod chip at the same time. I am wondering if anybody knows what would cause the issue I described and if anybody else has ever run into similar issues. Though I know most don't tend to mod 1.6 consoles if the can avoid it.
      I'm also curious if anybody else happens to have an Xbox motherboard that is warped around the CPU and GPU area. By warped, I mean that I can see a curve in the motherboard around that area.
      Thanks,
      DobaMuffin
    • By deadhamster35
      Okay, so I really messed up.
      I recently got back two 1.6 Xboxes that I haven't had for ages, immediately set out to soft mod them. Looked up and used the Rocky5 kit, worked perfectly, got the first one up fine. But then when I went to FTP some files to it and noticed the Partitions were setup in a way that my file wouldn't fit.
      Found a partitioning tool called Xbpartitioner 1.3b or something like that, and without doing any research I transferred it to the Xbox to resize the HDD partition. This erased the Rocky5 dashboard and put up an UnleashedX dashboard. I hadn't access to DVDs, so wanted to install the Rocky5 Extra Disc to the Xbox and run it from there. Found some type of program that claimed to mount and run the Extras Disc, performed the upgrade, Xbox came back to an error message. (Error Message 13). Some Googling says that this appears to happen when the dashboard can't be loaded.
      I softmodded the other Xbox successfully using the same Rocky5 setup and it's working fine. I was hoping to clone the working Xbox drive over to bricked one, but Chimp is listing the drive as locked and I can't access the EEPROM key. I believe the Rocky5 mod backs up to the HDD in the E:\ Directory, but I also believe the partition may have erased it?
      I went out, got some DVDs and burned the Extras Disc. It doesn't run in the Bricked Xbox, but loads up fine in the new one. The bricked HDD no longer contains the Exploited Savegames I used to initiate the softmod. I can load Retail games, but booting the dashboard leads to the error message (Error 13). Also saw suggestions to insert an Xbox Live game like Halo 2. This did not work either, the game simply reloaded instead of returning to the Dashboard.
      So basically what can I do here? Should I be looking to get an IDE to USB converter, so that I can copy the Exploited Savegames onto the HDD and re-load the Softmod? Should I be trying to get the EEPROM backup of the E:\ Drive, assuming it wasn't formatted? Is there something else I can do? I've done lots of searching and haven't found anyone else as stupid as me.
    • By suhdude
      Hey y’all,
      I have softmodded og Xbox for 3 months ago and up untill today snes emulation was fine (nba jam, contra etc..) Today when I was playing contra iii the sound started lagging noticably -also the music and sounds scatter a bit or play twice instead of once. I tried rebooting and removing and replacing the rom. Didn’t work?
      Does anyone know what the cause of this problem is? is it fixable?
      thank you so much if you’re willing to help.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.