Jump to content
Sign in to follow this  
Xbmcmodsforxbox

Looking for Oxm Disc

Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By HDShadow
      Please login or register to see this link.
      Very good and useful video about how to remove the Xbox's disc tray bezel/faceplate but at between 30 - 45 secs the guys says: "........................... you're going to think you've broken it but you didn't" or words to that affect, repeated several times.
      Well..............................................guess what: I tried this with the spare dead disk drive and thought I'd broken it.............................and I had. The shower of black plastic pieces was a good indication.
      What broke were both the retaining channels each end which slide down over the edge of the tray front not the locking tabs as you might think.
      I believe I understand what went wrong; when I pulled the tabs clear of the bottom edge of the tray I continued twisting the bezel just that little bit too much.
      What you should do is when the tabs are just clear of the bottom of the tray stop pulling out/twisting up the bezel any more and change to pushing it straight upwards to slide it off the tray. Once the tabs are clear of the bottom edge of the tray and you start to push up they are actually lodged against the flat tray front surface behind the bezel and from that point all you're doing is sliding it up and off. No more twisting or pulling out is necessary.
      The little crack you may here is, or should just be, the bezel pinging back into shape as it is under tension. If that is accompanied by a small shower of plastic then you've done it wrong.
      In short: you do need a bit of firm physical persuasion initially but after that be gentle. Bezels do break.
       
       
    • By Swirlygiver
      I have downloaded an emulator or two from XBMC4gamers downloader.  Where do you get the skins and artwork?
    • By LudoVicThor
      Hi I recently got steel battalion good as new for 300 buck and I'm stuck at mission 4 for now but my question is about the song we've got in the boom box is it possible to play my own song? BTW I'm looking for a live version I got the campaign only version of anyone have it I'm interested thank you. 

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.