DARK A Posted December 9, 2023 Report Share Posted December 9, 2023 i know you are focused on og xbox but i guessed you have knowledge on 360 modding i have a problem running j-runner on w10 every time i run it nothing shows up and i cheeked the tasks manager i see it open and close how to fix it ? i try windows xp but it cant handle it ps: i know my grammar is bad my spilling too Quote Link to comment Share on other sites More sharing options...
PRince404 Posted December 9, 2023 Report Share Posted December 9, 2023 Update your redistributables. (Msvc++, .net and the likes) Try AIO from sereby,org if you can't decide which one to get. 1 Quote Link to comment Share on other sites More sharing options...
DARK A Posted December 9, 2023 Author Report Share Posted December 9, 2023 i 4 hours ago, PRince404 said: Update your redistributables. (Msvc++, .net and the likes) Try AIO from sereby,org if you can't decide which one to get. everything is up to date same problem Quote Link to comment Share on other sites More sharing options...
Fringle Posted December 10, 2023 Report Share Posted December 10, 2023 (edited) 16 minutes ago, DARK A said: i everything is up to date same problem Pretty sure on Windows 10 it requires you to disable driver signature enforcement. This is done through the advanced troubleshooting menu during startup. This video will walk you through how to do that. Edited December 10, 2023 by Fringle 1 Quote Link to comment Share on other sites More sharing options...
DARK A Posted December 10, 2023 Author Report Share Posted December 10, 2023 48 minutes ago, Fringle said: Pretty sure on Windows 10 it requires you to disable driver signature enforcement. This is done through the advanced troubleshooting menu during startup. This video will walk you through how to do that. thanks i try it and didnt work Quote Link to comment Share on other sites More sharing options...
Fringle Posted December 10, 2023 Report Share Posted December 10, 2023 1 hour ago, DARK A said: thanks i try it and didnt work What device are you using as a nand flasher? Quote Link to comment Share on other sites More sharing options...
Marty Posted December 10, 2023 Report Share Posted December 10, 2023 It's almost always the soldering.... Quote Link to comment Share on other sites More sharing options...
DARK A Posted December 10, 2023 Author Report Share Posted December 10, 2023 51 minutes ago, Fringle said: What device are you using as a nand flasher? i havent connect it yet im only trying to open j runner Quote Link to comment Share on other sites More sharing options...
DARK A Posted December 10, 2023 Author Report Share Posted December 10, 2023 (edited) 25 minutes ago, Marty said: It's almost always the soldering.... maybe i should've been more specific i cant launch j runner Edited December 10, 2023 by DARK A Quote Link to comment Share on other sites More sharing options...
Fringle Posted December 10, 2023 Report Share Posted December 10, 2023 19 minutes ago, DARK A said: maybe i should've been more specific i cant launch j runner Check the application log in windows event viewer through computer management to see if it's writing an error to the log. Might give you a clue as to what's missing or what's causing it to crash when you open it. Quote Link to comment Share on other sites More sharing options...
Marty Posted December 10, 2023 Report Share Posted December 10, 2023 23 minutes ago, DARK A said: maybe i should've been more specific i cant launch j runner Okay gotcha. You need to disable driver signature. Check this out: https://www.terasic.com.tw/wiki/Disable_Driver_Signature_Enforcement_in_Windows10_x64 Quote Link to comment Share on other sites More sharing options...
DARK A Posted December 10, 2023 Author Report Share Posted December 10, 2023 15 hours ago, Marty said: Okay gotcha. You need to disable driver signature. Check this out: https://www.terasic.com.tw/wiki/Disable_Driver_Signature_Enforcement_in_Windows10_x64 Fringle already told me and that didnt work Quote Link to comment Share on other sites More sharing options...
DARK A Posted December 10, 2023 Author Report Share Posted December 10, 2023 15 hours ago, Fringle said: Check the application log in windows event viewer through computer management to see if it's writing an error to the log. Might give you a clue as to what's missing or what's causing it to crash when you open it. Problem Event Name: CLR20r3 P1: JRunner.exe P2: 3.3.0.1 P3: 65404d87 P4: mscorlib P5: 4.8.4150.0 P6: 5e176d21 P7: 15f6 P8: 0 P9: System.FormatException P10: Quote Link to comment Share on other sites More sharing options...
Marty Posted December 10, 2023 Report Share Posted December 10, 2023 You're using "JRunner with Extras"? Quote Link to comment Share on other sites More sharing options...
Fringle Posted December 10, 2023 Report Share Posted December 10, 2023 1 hour ago, DARK A said: Problem Event Name: CLR20r3 P1: JRunner.exe P2: 3.3.0.1 P3: 65404d87 P4: mscorlib P5: 4.8.4150.0 P6: 5e176d21 P7: 15f6 P8: 0 P9: System.FormatException P10: Can't remember if this is needed or not but give this a try and install/enable .net 3.5. https://learn.microsoft.com/en-us/dotnet/framework/install/dotnet-35-windows Quote Link to comment Share on other sites More sharing options...
DARK A Posted December 11, 2023 Author Report Share Posted December 11, 2023 On 12/10/2023 at 11:45 PM, Fringle said: Can't remember if this is needed or not but give this a try and install/enable .net 3.5. https://learn.microsoft.com/en-us/dotnet/framework/install/dotnet-35-windows i try it and i even updated the whole system i had to do backup before updating and didnt work Quote Link to comment Share on other sites More sharing options...
Marty Posted December 11, 2023 Report Share Posted December 11, 2023 On 12/10/2023 at 3:16 PM, Marty said: You're using "JRunner with Extras"? Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted December 12, 2023 Report Share Posted December 12, 2023 I am a bit worried now about trying to RGH my 360... Quote Link to comment Share on other sites More sharing options...
Fringle Posted December 12, 2023 Report Share Posted December 12, 2023 3 minutes ago, Bowlsnapper said: I am a bit worried now about trying to RGH my 360... There's nothing to worry about. It's actually pretty easy and cheap to do. Worst case is you have to troubleshoot some wire lengths or solder points and different value resistors to get consistent boot times. Don't be discouraged if it doesn't boot, just try the of the alternate points. Mine wouldn't boot xell or even power on at first but once I switched my wire to the topside pll point it booted Xell right away. 1 Quote Link to comment Share on other sites More sharing options...
Bowlsnapper Posted December 12, 2023 Report Share Posted December 12, 2023 Just now, Fringle said: There's nothing to worry about. It's actually pretty easy and cheap to do. Worst case is you have to troubleshoot some wire lengths or solder points and different value resistors to get consistent boot times. Don't be discouraged if it doesn't boot, just try the of the alternate points. Mine wouldn't boot xell or even power on at first but once I switched my wire to the topside pll point it booted Xell right away. Heh, I'll try to relax. Never RGH'd before so I'm a bit intimidated, but I'm sure the instructions I have will get me thorugh. I haven't read anything about which resistors work best on an individual basis so that's a new idea to me. Hope I don't have probelms. Thank you. Back to the topic at hand! Quote Link to comment Share on other sites More sharing options...
Marty Posted December 12, 2023 Report Share Posted December 12, 2023 55 minutes ago, Bowlsnapper said: I am a bit worried now about trying to RGH my 360... For you, I'd say it would be relatively easy. Just be neat and follow instructions. 1 Quote Link to comment Share on other sites More sharing options...
DARK A Posted December 12, 2023 Author Report Share Posted December 12, 2023 3 hours ago, Marty said: sorry i forgot to respond yes Quote Link to comment Share on other sites More sharing options...
Marty Posted December 12, 2023 Report Share Posted December 12, 2023 So, with a trusted source for J-Runner with Extras, disabling driver signature and running J-Runner As Administrator, you can't get it to open? Try another computer, or run it under a virtual environment like VirtualBox. Quote Link to comment Share on other sites More sharing options...
DARK A Posted December 13, 2023 Author Report Share Posted December 13, 2023 On 12/12/2023 at 6:26 AM, Marty said: So, with a trusted source for J-Runner with Extras, disabling driver signature and running J-Runner As Administrator, you can't get it to open? Try another computer, or run it under a virtual environment like VirtualBox. im using it in virtual w11 but i want to fix it for my w10 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.