Jump to content
fliper7der

Scaling Issues - UnleashX Dash

Recommended Posts

Sorry for the terrible quality picture. So, I'm using a Hyperkin HDMI-AV cable, and the dash is scaling the centerpiece very oddly. It's still working properly, but icons for apps and games seem to face to the right significantly. Is it because the aspect ratio has changed to 16:9 and 1080i support is on? It's not causing any issues with usability, but it looks really weird. Anyone else have the same issues?

1552203744689702475081939887252.jpg

Share this post


Link to post
Share on other sites

@fliper7der take a screenshot with UnleashX - press the Left thumbstick button followed by the black button.  It will be saved in the root folder of eitherthe Z, Y or X drive (next partition letter if previous is full) as a BMP file.  Download it to your PC and view it.  Does it look distorted as well?

Edited by KaosEngineer

Share this post


Link to post
Share on other sites

When I get home I'll check it at other resolutions and get a screenshot. I hate to change skins because this was my favorite one, but the shapes skins are nice too.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


Board Life Status


Board startup date: April 23, 2017 12:45:48
  • Similar Content

    • By Hazeno
      Ok guys got an issue that is getting on my wick. 
       
      Slapped a 2.3b Lite into a 1.6, used a clone LPC Rebuild Kit and proceeded to boot the console.
       
      D0 was connected to the board and ground was connected to the screw hole as usual.
       
      As soon as you put power to the console it will boot up then reset 2 times before FRAGGING. Only when D0 is connected and chip is off. With chip on with M8 1.6 Bios I can get a boot with Evo shield but it hangs after that and still turns on as soon as a power cord is plugged in. Front panel doesn't work at all. 
       
      Remove the chip or D0, and it'll boot fine to the original softmod it came from. 
       
      I've reworked it with my iron, even given it a hot air rework. Which point is most likely the culprit? Apologies on the lead free solder. Was using a friends over my own. 





    • By filevans
      Please delete this
    • By filevans
      Please delete this
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.