Jump to content

Taking a Look At the X3 - A Video Covering the History, Install, and More


Recommended Posts

  • 4 weeks later...
A decent amount of research, recording, money, and fun went into making this video! Haven't done one in this style before, but it seems to be getting an overwhelmingly positive reception. It might not be perfect, but I figured it would be fitting to post here.



Definitely a great video, very well put together. I especially like that blue X3CP w/Xtender!


Sent from my iPhone using Tapatalk Pro
  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By vicicarus
      Thank you in advance for any and all help provided,
      So I installed a X3 chip along with the LCD face plate that has USB on my v1.0 Xbox (not windbond/Sharp). I managed to flash bios to the chip but I am unsure of how to understand the bank switches. Bios checker always show unknown bios.
      I get Evox Bios to load when all 4 switches lights are on.
      I get X3 Bios to load when switch # 2 lights is on.
      Every other switch combination my Xbox just powers cycles on/off 3 times with power button flashing before it shuts down. I can't even get to the flash Bios menu anymore. So my questions are....
      Question 1: On the face plate are my switches are ON if they light up or are they OFF if no light is on! Is this correct? I don't see the on/off wording on it.
      Question 2: How do I determine where to flash a Bios? 256k/512k/1MB/2MB?
      Question 3: The graph description below shows what bank you are on depending on the switch combination, yes?
       
       256k Bank
      Bank 1: on on on on
      Bank 2: off on on on
      Bank 3: on off on on
      Bank 4: off off on on
      Bank 5: on on off on
      Bank 6: off on off on
      Bank 7: on off off on
      Bank 8: off off off on
      512k Bank
      Bank 12: on on on off
      Bank 34: off on on off
      Bank 56: on off on off
      Bank 78: off off on off
      1MB Bank
      Bank 1234: on on off off
      Bank 5678: off on off off
      2MB Bank
      Bank 12345678: off off off off
       
    • By xealous
      My flashbios gives a blackscreen on my xbox 1.6 when I connect the TV with a component cable. I read that I need to update flashbios. Also, my F and G drives don't show, so I think I need the 1.6 version of X3. Anyone know where I can get these files?
    • By lavaphoenix
      Hi everyone, I have a tsoped original xbox ver. 1.1 motherboard, clock capacitor removed, and running indi-bios. In rare occasions, when I turn on the console..I get a flashing green light with no image nor sound on screen. What can the green flashing light code mean? I tried unplugging the console from power strip, pressing/holding power button for 30sec. and when I re-connect the console and turn it on..I still get a flashing green light. But usually the console turns on fine. I'm not sure if it's a bad ribbon cable, or a bad sata adapter. I do know I have a foxcom IDE ribbon cable, and I do have a good quality sata adapter. The capacitors on power supply and motherboard look fine, they are not bloated, nor leaking. (capacitors look new)
       
      Thanks in advance

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.