Jump to content

Board Life Status


Board startup date: April 23, 2017 12:45:48
  • Similar Content

    • By AsuraFeratu
      I have some games that are HDD ready. Can I put them on a USB and copy to my Xbox HDD using file explorer?
       
       
      Excuse my noob......
      Please login or register to see this attachment.
    • By N163LPH03N1X
      $550CAD plus shipping
      Payment through PayPal.
      Please login or register to see this link.
      Please login or register to see this link.
      Please login or register to see this link.
      Please login or register to see this link.
      Selling a unique system to a new owner, I put together a great console with unique installed custom parts with a stealth switch to choose between empowering a lighted display or a dark environment while gaming. 
        This console is carrying an Xecuter 3 signature mixed with XCM's fitted 3x hard drive bay module which allows you to switch between 3 different hard drives which contains three different dashboards.    On the primary dashboard running UnleashX is themed with my signature advanced new age dynamic themes that I personally created and only available to valued supporters.    In the inside of the console has dual custom LED heat sinks on the GPU and CPU branded by Vantec's rare out-of-production IceBerq 4 Pros.    HardWare:   v1.2 Xbox Dashboard TSOP X2 Bios Samsung DVD Drive (Rare)Xecuter 3 Jewel (Mad Modders Edition) - only one I have... (Rare)x2 Vantec IceBerq 4 Pro (CPU & GPU) - re-pasted with Arctic MX4 (Rare)Xecuter 3 (Christmas Edition) Chip - Includes bank selector on front (Rare) Xecuter solderless Xapt3r V1.0-1.5  Custom LED Rocker Switch (Powers LEDs On/Off) (Rare)XCM Xtender - Extends the Xbox hard drive capacity to 3 drives total. Custom Blue LED PCB face plate under glow bars - hooked up to rocker switch Custom Blue/Red front eject/power LED Custom Blue LED jewel PCB - hooked up to rocker switch Custom Blue LED controller ports x3 Stock 8GB Seagate Hard Drives.   Software:   Drive 1: UnleashX Dashboard Emulators Homebrew Applications   Drive 2: User Interface Dashboard Emulators Homebrew Applications Drive 3: XDK Lancher Dashboard Console Applications Pros: Has rare hardware Custom colored boot animation Config Live 3294 with recovery (flashed to work with v1.6 xbox as well) Ability to boot 3 different drives on the same Xbox Turn LEDs on and off with a switch   Cons: Some scratches or nicks on the console Xapt3r has a wire soldered to the D0 (pin broke off) - works better than before. XCM IDE cable cannot be removed from Hard Drives(will result in damage to the IDE cable) IceBerq 4 Pros are fans noisy (due to age)    FYI: If console fails to boot on arrival means the pin from the Xapt3r has fallen out, the bank select button was switched in transfer or chip has come loose (you can still access the inside). Keep in mind when taking the console apart or modifying it by any means do not remove IDE cables from the hard drives, they're basically plugged in permanently.   I like to keep customers up to date to know what they are buying if you have any questions please ask.   Selling as is.
    • By N64 freak
      This HDMI mod replaces the AV port completely and offers an HDMI port instead for convenience.
      The Installed HDMI mod does look like this:
      Please login or register to see this attachment.
      The HDMI mod does offer 5.1 sound through the HDMI port. If you don't need 5.1 (or your TV might not support it) you can simply disable 5.1 audio and get digital stereo audio instead. For those who want to add an optical output to there Xbox the HDMI mod does offer 3 solder points to add a TOTX178 optical transmitter.
      To get the HDMI mod installed you first need to get the AV-port removed.
      To get it removed you could either use a hot-air station or a heat-gun to remove it at once. But that would put a lot of thermal stress on the board!
      The better and recommended alternative is to disassemble the Port and remove it one part at a time.
      First desolder the Metal Tab holding it in place by heating them and prying the metal tab up to pull it out.
      Please login or register to see this attachment.
      When the metal tab is removed take a sidecutter and clip off all the pins from the video port as they are what keeps the Port in place.
      When they are clipped off you can take the port cover off by simply pulling it upwards.
      Please login or register to see this attachment. Please login or register to see this attachment. Please login or register to see this attachment. Please login or register to see this attachment.
      Next step is to remove the remaining plastic piece and desolder the rest of the pins and clean up the area a little.
      Position the first Adapter exactly as show in the photo. The red arrow marks the PTH that has to be alligned centered.
      Please login or register to see this attachment.
      Once Positioned solder all the marked points down and make sure they are properly connected before continuing with the second adapter!
      Please login or register to see this attachment.
      Next up is the second adapter. Just position it above the first adapter using the 2 big holes to allign them and solder down the marked points. Again check continuity before continuing with the next PCB!
      Please login or register to see this attachment.
      Last PCB is the HDMI mod itself. You need to position it slightly off centered on the second PCB. The HDMI ports pins will be position it correctly. Just solder down the points that are marked with the red arrows and the install is almos done!
      Please login or register to see this attachment.
      Last up is setting the Video mode. You need to add 2 small bridges on the bottom side of the PCB. Just solder in the 2 bridges and the video mode is set correctly!
      Please login or register to see this attachment.
      If you want to use the optical out you can easily add a toslink port to the HDMI mod by simply soldering a Transmitter to the 3 marked pins.
      Please login or register to see this attachment.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.