Search the Community
Showing results for tags 'reboots'.
Found 2 results
Hello, I've been lurking around here for a couple days, but haven't found anyone with the same issue so I thought I'd ask. I have a v1.0, never modded, xbox (original and only owner). Last time I used it (about a year ago), it was working great, but when I turned it on the other day, it attempted to boot three times, then started flashing red and orange. I was able to get it to boot after restarting it a few times, and I played through a game for about 5 min (then game froze due to a scratch, I'm pretty sure), but I have not been able to get it to start up again since (just 3 reboots and FOAR). If I hit the disc eject button once it's FOAR, the TV will show the green blob come on screen (it freezes after less than a second), but I'll continue to hear the music that goes with it (haven't left it on long enough to see if it goes to main menu and i can hear the sound of changing menu selection). I've seen a few '3 reboots and FRAG' articles, so I'm curious if this is the same situation, but maybe error colors are different for the earlier xboxes? Based on what I've read so far, I've checked the following: Cleaned the innards of most of the dust (had never opened it up in my 18+ years of ownership) LPC traces are undamaged (even did continuity check for sanity sake) Reseated all connectors Checked PSU voltages -- this was an interesting one, all voltages were correct, except for the power on signal (pin 11/teal wire), which i measured to be be 2.6V, not 3.3V Clock cap wasn't bulging, but it does look like it leaked a little, so i removed that, cleaned the area, but I don't see any damaged traces I'm planning on replacing all the caps on the board as a next step, but I'm wondering if anyone has an idea for something else worth testing to figure out what might be causing the error state. I'm so curious if the 2.6V power on signal is an indicator of anything. Does that get set by the CPU or the PSU? Thanks in advance for any ideas or suggestions!
MAMEoXtras 2.0 runs just fine but all the MAMEoXtras updated 2018/2019 just reboots my Xbox when executing the .xbe, tried deleting udata/tdata/cache, still the same, what could be the problem?, thanks for any clues.
Board Life Status
Board startup date: April 23, 2017 12:45:48