Search the Community
Showing results for tags 'loop'.
Found 2 results
Ok guys got an issue that is getting on my wick. Slapped a 2.3b Lite into a 1.6, used a clone LPC Rebuild Kit and proceeded to boot the console. D0 was connected to the board and ground was connected to the screw hole as usual. As soon as you put power to the console it will boot up then reset 2 times before FRAGGING. Only when D0 is connected and chip is off. With chip on with M8 1.6 Bios I can get a boot with Evo shield but it hangs after that and still turns on as soon as a power cord is plugged in. Front panel doesn't work at all. Remove the chip or D0, and it'll boot fine to the original softmod it came from. I've reworked it with my iron, even given it a hot air rework. Which point is most likely the culprit? Apologies on the lead free solder. Was using a friends over my own.
I'm new to the xbox modding scene. I was given a v.14 og xbox from a friend that was never modded/tampered with. I'm thinking about doing a tsop since I like the idea of not having to deal with locking/unlocking hard drives. My question is, if I remove the clock capacitor, which bios make sure I don't run into a clock boot loop error 16?
Board Life Status
Board startup date: April 23, 2017 12:45:48