Search the Community

Hey Guys, I got a list of stuff Odd and Ends here that needs to go. Xbox, Dreamcast, GameCube stuff. I only have a limited supply of it. Once its gone its gone for good. I accept PayPal, please direct message me if you want to buy something and ill give you a shipping rate based on your address, super easy. Used Debug Shelled, upgraded 128mb Ram v1.0 Xbox -$350CAD Original Xbox Debug Kit Shell. Motherboard Rev. 1.0. 128mb ram upgraded board (Not Original Debug Board). Delta 1.0 NTSC PSU. TSOP Ind-Bios. Thompson DVD drive. 8gb stock hard drive. Software Details: Original Microsoft Dashboard Commentary: Missing its original Debug hardware (but can be converted with the right knowledge with current parts) The Motherboard used in this console is in immaculate condition. Clock cap was removed and CPU caps replaced. Original 1.0 fan heat sink was removed and replaced with a 1.1/1.6 heat sink. CPU and GPU was re-pasted. Some scrapes to the bottom of the shell and small scratches and one small stress crack on top shell. Rubber Feet Missing. [Added my own custom rubber feet]. Shielding Intact. New IcedCube Gamecube Shell, Metallic Blue -$300CAD Details: Full GameCube Shell Replacement Never been mounted or used. Brand New In-Box Condition (other than taking it out for Photos). Hard to Find IcedCube Shells. Comes with all Stickers and parts. Perfect Combo with Qoob Pro or Viper. New/Opened SEGA DreamCast GDEMU Pro v5.56 [Black] + SD Extender -$80CAD GDEMU PRO Optical Drive Simulation Board for SEGA Dreamcast DC VA1 SD Extension GDEMU is a SD card based replacement for the optical drive in Dreamcast console. GD-ROM / CD-ROM drives inevitably wear out and fail – as do all mechanical devices – and since the console is no longer being manufactured it’s nearly impossible to source spare parts. This project was meant to provide a “once and for all” solution, since it doesn’t have any moving parts. Features Replace your faulty GDROM Drive with a Solid State Optical Drive Emulation Board. Easy to install, the original optical drive seat can be removed and replaced with GDEMU, no welding, no modification to the machine board. Only suitable for VA1 motherboard DC Game machine, otherwise will damage GDEMU and do not plug in or pull with electricity 100% compatible with game, perfect running original GDI image, and compatible with CDI image. Note: please don't upgrade the firmware, it is the latest firmware version, and it will be permanently bricked if you upgrade the firmware. Package Contents 1 x GDEMU PRO Optical Drive Board 1 x SD Card Extension Cable New Sick Mods Xerc CME Bundle [OG Xbox] -$60CAD Quanity Left: 2 Install Tutorial: https://www.ogxbox.com/forums/index.php?/topic/1295-n163lph03n1xs-xerc-cme-case-modders-edition-installation/ Installation Video: https://www.youtube.com/watch?v=wrbh8Phqy3s Preview Video: https://www.youtube.com/watch?v=Y8XS_frnGgI&t=7s Features Power Console On and Off via Xbox remote. Eject or close DVD tray on the fly with remote. Audio LED pulsation, LED's pulse to the sound of your Xbox. Remote configuration, setup and configure the buttons the way you want. LED chaser Mode, toggle through modes changes the LED chase patterns with remote. Speed up or Slow down led sequence. SmartXX OS boot Support Connects to MS DVD Dongle internally for menu browsing with remote (Perfect for XBMC media) N64 Freaks Xerc 2XE [OG Xbox] Used - $20CAD/ New -$25CAD New Quantity 3 Left Used Quantity: 4 Left The XERC 2 XE is a small device which allows you to turn your Xbox on and off with your remote control. You can also eject and emulate long and short power presses. The XERC can be configured to work with many different remotes, and you can change the button setup at any time without opening your Xbox. It also includes a bonus LED Fader feature on the status light. The IR Receiver is included. Features Pulse fading Xbox Eject/PowerLED Power Console On and Off via Xbox remote. Eject or close DVD tray on the fly with remote. Remote configuration, setup and configure the buttons the way you want. SmartXX OS boot Support Connects to MS DVD Dongle internally for menu browsing with remote (Perfect for XBMC media) New PulseVU 2X [OG Xbox] - $25CAD Quantity: 2 Left This device pulses any LEDs you connect to it with the beat of the music coming from your console. It can also has all the features of the SICKmods Fader and works on the original "Fat" Xbox360's Ring-of-Light. This device works with up to 150+ LEDs. 17 different modes allow you to set your LEDs to the VU mode, fader, dim, solid on, off, or any combination of those. Change modes easily by using an existing button on your console, rather than opening your console each time or installing another switch. A Quick Disable feature lets you quickly turn off your LEDs and then quickly turn them back on at a later time. This works best on 1.6 revision Xbox motherboards due to their standby power always being active. Face Plate LED Bars [OG Xbox]Colors: [Blue Black Green] - $10CAD Blue quantity: 11 Black quantity: 8 Green quantity: 10 This device is used inside the OG Xbox's front face plate to allow under glow in front of the Xbox. Soldering is required to install up to 11 LEDs per bar with Resistors in Series or Parallel. Bars will need to be rigged up to a 5V source coming from the Xbox. Two Bars = 1 Set/1 Xbox for $10 CAD. Comes in Blue Black or Green PCBs. 2TB SATA Hard Drive [OG Xbox] Lineberry Build - $250 2 Terrabyte filled Xbox Hard Drive Ready to go into an Original Xbox with a IDE to SATA adapter [Not Included] Xbox drive Includes a full library of Xbox Games, Homebrew, Emulators & roms, Dynamically setup by LineBerry XBMC4Gamers Dashboard. Note: Drive is Unlocked and will need a modchip or Tsop to use. Please Message me for Inquires N163LPH03N1X

Hello everyone, some may be familiar with the 720p patches thread on the Emuxtras website. I want to make a thread here as well so they won't be lost. Many patches have been made(by various contributors) with many (near) perfect conversions. Some games require a 128MB or even a CPU modded Xbox, like the ones made by N64 Freak. But many also run on the a standard 64MB Xbox. IPS patches are really small (just a few KB's) and only contain the modified hex values and on what position in the binary they should be modified. You will need an application that can apply IPS patches if you want to use them. You can use Lunar IPS https://fusoya.eludevisibility.org/lips/ but there are also others. Because the patches are only a few KB's this means it is also a good candidate to patch them directly on the Xbox in XBMC. This is also why I have named the patches after the game ID's and denoted the target Xbox (64MB, 128MB CPU) to facilitate this. There is a project called python-ips( https://pypi.org/project/python-ips/) which runs on python version 2.7 (supported on XBMC) which seems to apply the patches correctly and can create backups. I might look into creating a XBMC python script that incorporates python-ips. But unfortunately I probably won't have too much time to do it and since I am unfamiliar with the XBMC specific syntax it will take a while. However if someone wants to pick this up before me than that is fine. This also goes for other making additional patches. Some of the better games that seem to run amazingly were made by Silverrock see videos of Doom 3 (https://www.youtube.com/watch?v=MZf3CqUc_hs) and Darkwatch (https://www.youtube.com/watch?v=jhOPzUNW7Bo) I will add the patches here soon. You can check them out on Emuxtras if you want them now. here are some screenshots of some of the games.

I thought it might be nice to have a thread so you everyone can show off their custom xbox's and list their mods for others to admire. I'll start with a few of mine: The white slim one had an LCD-MOD and LCD-CON to allow the lcd plus an led fader deluxe from sickmodz, custom made jewel with led ring and internal dvd dongle The red/black one was my first modded xbox, pretty basic tsop box The blue one was a media streamer with internal wifi dongle, internal wireless controller dongle an X3 and X3 lcd and rgb leds The other one is my xbox mini with internal wifi, laptop hard drive, pico psu and internal dvd dongle mod plus 128mb ram and 1ghz cpu motherboard from trusty The last one is my current X3 box with X3 lcd and pro switch, internally it has a 2tb drive Feel free to post yours

Hello everyone! For the last little while I've been working on reviving Xbox Live on the Original Xbox. I've made some good progress along the way including the signature check and even decrypting the time stamp. There was a forum post similar to this on AssemblerGames (Rip that forum) however I feel the need to start from the beginning. I currently have a GitHub repository that will remain to be open source for the duration of development which can be found here: https://github.com/zzVertigo/XboxLive.Server If anyone has any suggestions our happen to notice something that I am a missing it will be much appreciated :P Thanks.

One of the screws that holds down the DVD drive is stripped and the screw won't tighten. Other than the obvious, let it alone or even worse glue it (as I want to get it out again), is there something like a helicoil to repair the case? Just curious if anyone has experimented with this. Not a crisis but I would like a more permanent but removable solution. I was thinking even some kind of epoxy that I could pour in that would harden and I could re-thread it with the screw. Thanks!