Search the Community
Showing results for tags 'pinout'.
Alright folks, Of the numerous aladdin chips i've installed into 1.6 xboxes, i have installed the pin header with pin 4 removed, rebuilt lpc, connected bt->gnd on chip, cut the lframe trace at the xyclops chip and ignored installing the d0->gnd wire. This has always worked fine for me. Recently i have seen different and conflicting instructions on de-pinning the header. it was suggested to also remove pin 3 (lframe), 6 (5v) and 12 (gnd). I'm wondering what the benefit is and whether i need to start doing it this way? I'm presuming pin 6 has been left out so standby power isn't lighting the led, and pin 3 to disable lframe without cutting the trace? why remove the second gnd (pin 12) though? Just wondering what the consensus was on this, is this a better way to do it, is my usual way now incorrect?? Figured it was time to ask the experts! Cheers
So I have an executer 3ce chip that is missing the reset/eject adaptor. I have the cable that connects To the chip I just need to know which wires, that are connected to the eject/reset buttons on the Xbox, to splice into. Any help would be appreciated. Thanks!
Board Life Status
Board startup date: April 23, 2017 12:45:48