.jpeg.8bbc3e7a41a8c44c9000a3ac33defe67.jpeg)
Fila
-
Posts
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Store
Posts posted by Fila
-
-
1 minute ago, Ging3rguy said:
Did you upgrade your ide cable?
Yes, 40 to 80.
-
10 hours ago, KaosEngineer said:
Great! Time to fill it up.
One complain, xbox boot up too long, first i have "Loading ind-bios" for about 30 sec, then i have normal xbox intro but modified for IND-BIOS (white background, green text and logo) next 30 seconds.
-
@KaosEngineer@Ging3rguy@JonahUK Thank you guys very much for help!
-
1
-
-
15 minutes ago, KaosEngineer said:
Use a 256KB BIOS iND-BiOS 5004 F and G (aka Beta Feb-11-05)
You don't have to use a 512KB BIOS just because your TSOP flash memory device can support one.
1.0 and 1.1 Xbox's have a 1MB TSOP packaged flash memory chip that holds the BIOS/Kernel. For a 256KB BIOS, the flashing software writes 4 copies one after the other to fill the chip and for a 512KB BIOS two copies.
Note: Not all flashing software writes multiple copies of the BIOS file to fill the chip (e.g., GenToox Loader). But I believe it's only used to flash the Sharp brand TSOP flash chip.
Looks like its working, this photo is from dash, not any disc is inserted.
-
3 minutes ago, Ging3rguy said:
I think you mentioned you have a V1.1 xbox so you can use 512kb bios.
Ok i choosed 512KB and yes i have 1.1. Which option here?
-
Done. Which bios i need to choose here? 512KB or 246KB (1.0-1.5)? its Non-Winbond method listed in HeXEn TSOP/modchip flashing menu.
-
I will solder those points, gonna update when im done.
-
1
-
-
3 minutes ago, KaosEngineer said:
Looks like the write enable bridge has been removed from the top points at R7D3. I suspect the bridge across the pads on the bottom of the motherboard at R7R3 has been removed too.
Well, looks like end of the story. Thanks for the help anyway.
-
5 minutes ago, KaosEngineer said:
Nice, you can easily use Hexen to flash the TSOP as long as the write enable points are still bridged together. The top one is at R7D3 right off the edge of your picture. The other is on the bottom of the motherboard at R7R3.
-
8 minutes ago, KaosEngineer said:
That program doesn't show you the information you need to know. Open up the console and look at the TSOP chip at location: U7D1.
You do know that it is booting the Evox D.6 BIOS. It really needs to show you the manufacturerID:deviceID byte values instead of trying to help you by telling you the Chip type which is of little to no help at all.
-
18 minutes ago, KaosEngineer said:
Oh right, v1.1 listed in UnleashX's System Info page.
Need to check the brand of the flash chip on the motherboard.
Verify which brand it is: Sharp, ST Microelectronics, Hynix, etc.
Well, im confused right now ... (this bios checker is from the latest Auto Installer Deluxe (2018))
-
1 minute ago, KaosEngineer said:
If the write enable points on the motherboard are still bridged, you can use Hexen 2018 to reflash it.
What version Xbox do you have?
You can't use X2 5035 unless it's a 1.0 or 1.1. I suggest using iND-BiOS 5004 67 (F and G).
You have version of my Xbox on the photo, its 1.1 NTSC or do you ask for something more specific?
-
1 minute ago, JonahUK said:
See my edit.
Before flashing though, you need to confirm your model number and TSOP brand/type. Please research before flashing.
I saw edit, ok i will try to check or you can tell me now how to do it, it would be faster. Also thanks for taking time to help me guys : )
-
Just now, JonahUK said:
What @KaosEngineer says is true. Hexen boots a bios with the LBA48 patch included.
Your bios does not support LBA48 so you will NEVER get the extra space until you reflash your TSOP/Modchip.
You can confirm this via the Kernel versions shown in the screenshots above. Hexen is booting 5838 and you are booting 4817.
Ok i get it, but what now? can i reflash this with only HeXEn or i need to do something on my motherboard?
-
Im pretty new to this topic but, there are others mods that are considered as "hard"? because i cannot find modchip on the motherboard.
-
11 minutes ago, KaosEngineer said:
Your booting BIOS doesn't have LBA48 support or an older version of the patch. At the top of XBPartitioner's main screen after the error message, it should show the patch level it found in the BIOS your modded Xbox is booting.
Is your console soft or hard modded?
If hard modded, reflash your modchip or TSOP (with the one of latest BIOS found on the Hexen 2018 disc).
Update: From the information you provided, it looks like your console is soft not hard modded - Kernel: 1.0.4817.1.
Which softmod did you install?
Well, my console is hard moded cuz it reads burned dvd's without any dashboard or softmod (i bought that xbox with empty original hdd, original dashboard and when i formated that hdd it still reads burned dvd's). Also i used that tutorial to prepare new hdd, look up on the options that i choosed in HeXEN,
-
Hello, ive just done HDD upgrade using this tutorialand xbox only see 120gb out of 500gb from my new hdd, what is wrong?funny enough HeXEn shows me the proper status of 450gb+ free space on F drive, the same with Xpartitioner (but only when im using this app from HeXEn disc).When im entering Xpartitioner on dashboard then i got Warning ..."!!!! WARNING !!!!! LB448 info not found! Custom Partitions will not work with this BIOS! Update your BIOS to one which supports at least LBA48 version 2. Press Y to continue or any other button to abort."There you have system info ...
Board Life Status
Board startup date: April 23, 2017 12:45:48
Upgrading Hdd Problem, Only 120gb Out of 500gb Hdd
in Repair
Posted