Onaga

I put a new Port on the Mobo, still not working. Yes, just the one setup.

I did try different HDDs and Dashboards, didnt work. They all work in my other consols.

yes it lights up. both colors light up (green/orange). as mention in my first post, I took of (desolder) and put a new Ethernet port to the board. Did not help. I can't get it to work. I'm going to desolder the RAMs, Caps and HDMI Mod and use another board that works. From now on I check if the board gets an IP before I upgrade it with mods. Thanks for all the help!

Thanks, I know fatxplorer, but it's more time consuming for me to take the harddrive out of the xbox. FTP seems easier especially for very small data transfar. For brand new harddrive I use fatxplorer ect. It's not about me. I have multiple consoles in my collection that work fine. The one we are talking about is for sale and I don't want to sell a consol with problems like this. It should be as user friendly as possible. Xbox, 2TB HDD, 128MB RAM, new Caps, awesome Dashboard, and there we go... pop in LAN cable and play online useing XLink Kai... just as usual.

no solution yet, my modem looks clean, no blocked MAC addresses or anything like this. I'm clueless

okay, I check the modem again and give a feedback soon! Thank's for all the help so far!

Not the one we are talking about... any other of my 6 xbox gets an IP.

Yes, 4 ports and everything gets an IP, doesnt matter what I connect, Pc / Xbox or any other device like Nintendo Switch, Ps4/5 ect.

Yes I use two different setups but they are not connected. For FTP I just use the IP-Router. Xbox gets a static IP and I can easily connect via FlashFXP. There is no other router or modem in between. It’s more like a closed network. For XBMC I connect straight to modem and basically get the IP and internet connection. But not for this one, it stays at 0.0.0.0. Never faced that problem before. And I don’t understand it because I didn’t change anything on my setup or installation. I’m going to try what you recommend, maybe I get the Xbox to work. It’s still not the ultimate solution for me because I don’t want to keep the Xbox. It’s for sale.

Because it's just an old setup I'm useing almos 20 years now for FTP. Easy and save and I got all the programms on my XP PC... FlashFXP, Eeprom Reader, XISO ect... Modem is "Fritzbox 7430", nothing special, I use it all the time and never had any problems. It's really strange never faced a problem like this before.

For FTP connection I use a "Allnet ALL1294A Broadband IP-Router" between XBox and PC (Old PC with XP on it). This is where I get the IP 192.168.0.6. I do it all the time. For "Internet/XLink Kai/ XBMC Cloud" I hook up directly to my modem (as I do with all other XBox after TSOP ect.) This is where I get 0.0.0.0. Yes, I replaced ICS 1893AF two times on the motherboard (desolder and reinstall new one). I did same for the "Ethernet connector". Didn't help. Setup on HDD seems to be fine as well... because it works in every other Xbox I own.

255.255.255.0 ?

It’s not only Kai, I can’t download from xbmc cloud as well. Every other Xbox connects without any problems. Same settings for modem and XLink Kai. Same bios, same dashboard, same HDD ect. Basically just different mainboard.

You know how to connect to XLink Kai? No complex setup… just a Xbox with tsop, XBMC4Gamers set to DHCP, lan cable to modem. Basically I get a IP for example 192.168.1.56… but it doesn’t work. It’s just 0.0.0.0. For FTP I get IP. 192.168.0.6. Setup is little different. But that’s not important for me. Important is that I don’t get connection to internet (XLink Kai). I have multiple consoles and they all work. Same setup for all of them (hardware/software).

I have no clue…. For FTP I get IP… but for internet I don’t. I can hook up other consoles at the same time and they work That’s why I’m asking. It’s no joke. Any ideas what to do? Could it be a console that got banned by Microsoft back in the days?

First time I got no IP on an Xbox Classic! Add new Caps, 128MB RAM upgrade and it works totally fine. I use XBMC4GAMERS, iND Bios, just same setup as always..., Network is set to DHCP. Can't get an IP! Tried two different ethernet ports (ICS 1893AF)... still no IP... Any solutions, please?? Edit: -Tried new ethernet connector as well, didn't help... - FTP connecton works!!

Okay, thanks for the clarification, was hopeing for a file like this.

Hey there, I already saw the instruction, but isn't there a different way to change the titles? I don't want to use the "Controller" for this... I want to take the "File that contains the titles", get it onto my PC via FTP and change it by hand (keyboard). Is there a file like this?

Hey Roxky, which file of XBMC4Gamers contains that info? Because I want to change a lot of titles but I want to use my PC for this.

I can highly recommand Midnight Club 3: DUB Edition - Remix... forget about MC 1 & 2 if you don't really like the series but Dub Edition Remix is worth it... I remember when we played the s*** out of this game. 100% worth it!

You have a benefit in loading time for a lot of games, this is for sure! I made a video where I compare 733Mhz vs 1,4 Ghz and you have 3 sek faster loading time just for "FarCry Evolution"... combine this with a SSD and you get an insane loading speed/boost. Faster loading time stays even if you patch the xbe file, thats awesome! You can also see a huge difference if it comes to Ps1 Emulator... as well as picture(video) quality on every other emulatore (way sharper and more colorfull). Overall I'm very happy with the 1,4Ghz XBox... took me some hours to make my HDD almost perfect... there are just a few very good game titles that I can't get to work but I can live with that. I mean, I have a stack of modded XBox consols, I don't care if I have to take a regular one to play Call of Duty 4 just because it doesn't work on my 1,4Ghz, haha

I don't understand either... the switch is usless from my experiance, at least for xbox games. Not sure if there is any difference for movies or emulators... but emulators works all fine for me except of "Ninja Massive Pack"... have to use KAWA-X for Neo Geo Games... It's really not easy to make all the games work on a 1,4Ghz... some games requier 128MB patch, some not... some require Trusty 1400 patch, some FriendTech... sometimes you have to patch multiple *.xbe files... and some games worked after I patched manually with HxD, for example "Manhunt". So far it seems like I can't get 72 out of 761 games to work.

Thought the same, but it does not work for some reason. "XBMC3.5.3 - System Info" showes no difference either if I flip the switch, it's always 1402,XX MHz.

Is there a way to use Analog2HDMI (Component+SPDIF) as a converter attached to Componet Cable? I tried but I get no sound on the TV.

Use multiple of these adapters and every tenth has a problem, but that's fine for me... everytime I order 5 I get 8-10... most of the sellers put few more adapters into the box than ordered.