herooftheday

Hosted in the US so yes takeing it down would be not so hard because what he does is still modding the bios and selling the device, atleast here in germany that would be enough.

Jafar: https://github.com/Kekule-OXC/Jafar socket edition: https://www.ebay.com/itm/115813918300

well sadly no dice but my jafars did work beautiful. sadly I can not find the socket version.

P.S. I used the bios chip from my working xblast chips it is the aladdin.

I also get this error wehn trying a openxenium Welcome to the FlashcatUSB interfacing software, build: 651 Copyright 2023 - Embedded Computers LLC Running on: Windows (64 bit) FlashcatUSB Script Engine build: 312 Serial NOR memory database loaded: 503 devices supported Serial NAND database loaded: 68 devices supported Parallel NOR memory database loaded: 405 devices supported Parallel NAND memory database loaded: 279 devices supported OTP/UV EPROM memory database loaded: 47 devices supported Connected to FlashcatUSB Classic, firmware version: 4.56 Hardware version: PCB2.4 BSDL database loaded: 26 total definitions JTAG TCK speed: 1 MHz JTAG chain detected: 1 devices JTAG TDI IR chain size: 8 bits Index 0: JEDEC ID 0x59604093 (Xilinx_XC9572XL_(VQ44)) JTAG engine setup successfully JTAG index 0 selected: Xilinx XC9572XL (IR length 8) Checking for a device specific script to automatically load Loading device specific script: C:\Users\Paul\Desktop\FCUSB_WIN651_082223\Scripts\SVF_Player.fcs Button Hander::Calling Event: RunSVF Running SVF file in internal JTAG SVF player SVF Player: Failed sending SDR command (line index: 41) SVF Player: TDO: 0x03FFFE SVF Player: Expected: 0x000001 SVF Player: Mask: 0x000003 Error playing the SVF file Button Hander::Calling Event: Done Disconnected from FlashcatUSB Classic device Connected to FlashcatUSB Classic, firmware version: 4.56 Hardware version: PCB2.4 BSDL database loaded: 26 total definitions JTAG TCK speed: 1 MHz JTAG chain detected: 1 devices JTAG TDI IR chain size: 8 bits Index 0: JEDEC ID 0x59604093 (Xilinx_XC9572XL_(VQ44)) JTAG engine setup successfully JTAG index 0 selected: Xilinx XC9572XL (IR length 8) Checking for a device specific script to automatically load Button Hander::Calling Event: RunSVF Running SVF file in internal JTAG SVF player SVF Player: Failed sending SDR command (line index: 41) SVF Player: TDO: 0x03FFFE SVF Player: Expected: 0x000001 SVF Player: Mask: 0x000003 Error playing the SVF file Button Hander::Calling Event: Done

I got a flashcat and now it worked but sadly now the chip does not boot anymore I used NANO USB Programmer and the 1MB bin file from here, I used this programmer before with the 256k chips without a problem. what svf file did you use? I used this one: Gruß

all have been swapped with new ones so that is it not. maybe other caps dieing as well cpu and the ones on the left have been replaced.

You might be right. I may install a xbox hdmi inside just to test if it would fix it. I have 5 here 3 from bitfunx one from pound and one from hyperkin all have thew same issue but on the monitor aswell as my samsung sart tv no issue.

I found the issue finally It was my TV but only on 1.0 and 1.1s. I only tested it on this monitor when it did work again because of work I pushed it to the side: the one with the x3 chip atleast, the one with ind bios also had issues on that monitor. on my philips smart tv 75pus7608/12 it did not work with soundbar on and better without, but some games where not affected.

would it boot xblast or gentoox from a cd?

I would be interested if it would boot hexen, but only out of pure curiosity.

It comjpletly fixed it though so I dont kinow really what was the problem.

I found the isssue while pdoing my crystal xbox with xecuter 3 chip it was cerbios. I flashed it to ind-bios and it works without any issues. now I have to redo my hdd for it both are PAL 1.1s

yes I will definetly buy a flashcat I hate the lattice flasher rn. sadly I still have nand-x and jr programmer here but they will not work sadly.

Very nice

but to germany would be expensive. or I just buy myself the pcbs and chips saw it is around the same as the alladin mods anyways. I found the gerber files here and the svf file but there where never any kicad files released?

on the vcc line is now 3.3v so it shouold @Marty is the same thx alot

no with the mod showen aboth when I did it with the supply no and now no no the diagram showes the reference notch and the connector as well also the gnd wires match that. and 3.3v and GND on the aladdin is right the otherpins like othe diagram. but is from china so everyones guess really. Oh ReAlLy I know they where but the wires are old/ beaten up

because the black is kynar wire because the wires included are to thick. hier mit den kabeln:

Wiring

did work now I get : Device#1 LC4032V: Failed to verify the ID (Expected: 0x01805043 Read: 0x00000000). ERROR - Check configuration setup: Unsuccessful. ERROR - Programming failed. wireing seems fine I use his jed file

I know but he has the real one my board looks totaly different I could but there must be a external way external power did not work for me atleast.

yeah sure I use a lattice HW-USB-2A

I do that but still it does not get detected edit: I use a lattice HW-USB-2A Failed device detected board power is not turned on

I also have a question on it my programmer has not 3.3v only vcc can I use a voltage regulator on it or do I have to mod my programmer? Gruß