herooftheday

Hi I would go to ali and also have a look there. I get them there usually for 10€ there are also flashed with evox but you could re flash them. I could also sent you an jafar chip with xblast on it.

I already did as I wrote, since it is alpha some of the games I like crash sadly well lets be hopeful

ah ok thx will try it with out titan thx

Hi I did mod one of my 1.0s with the stellar hhdplus and the stm works so far sadly "EvoX Titan 128MB HDPlus UDMA4 YD" does only really work if I press eject Cerbios has no problem with booting up, but only shows picture when the hdd has been read. Gruß Edit: I use a cheap U4 adapter.

when you press eject the ring it turns red and than press it agian and it will boot into smartxx OS completly forgot

fixed it

HI I just got a new xbox with smartxx v1 or v2 bot sadly it does not wanna boot into smartxx os/ does it hava a os like the opx? can I reflash it to get it back than? Eject and power does boot into evox Gruß

What is the value for it or just one with 6.3V from the xboxs?

for the pcb do I need the big cap? sadly there is no bom?

Pi Zero W is it not slower like a rpi1?

well I just desoldered the wires from the chip and put it in the console and started it, maybe it is not ok with the pi 2B?

if he used evox by default in it it is 20%. idk what cerbios used by default. my guess 30-40% the ini file should fix it.

Success did work with hotswap

thx I got everything for it, sadly not the firsttime hotswaping I alsogot the XeniumOS_2.3.5_No_Pineapples. Gruß

Yes you could.

Yes taht is normal because it looks for evoxdash.xbe You can copy that over to get xbmc4gamers running: https://www.hazeno.com/home/hdd-upgrade-2tb-and-under that is new to me hmmm. @KaosEngineer could help with that you can copy over the cerbios.ini (included in hazeno) file where you can control fanspeed.

I never had issues with it. If it says unsupported. By the flash process ist verifys aslong as it reboots everything should be fine.

There is https://www.hazeno.com/home/hdd-upgrade-2tb-and-under there is everything you need with pics as well. also you will need https://fatxplorer.eaton-works.com/3-0-beta/ iso/cci you can google for them

Also if you are confident with soldering you can remove the BT point from the chip and board and just ground it so it will always boot into the chip.

connect it to the lan, boot up the console if it has a dashboard connect to it via ftp cients: filezilla-project.org than pushover XBlast_OS_v0.56.xbe to the C-Partition. also create a folder named in C-Partition called Bios an in there push over cerbios.bin : example: Cerbios Hybrid V2.3.1 BETA.bin My mirror for Cerbios V2.3.1 Beta start xblast though the xbe and go to flash menu. use hdd flash and follow the prompt. and that should do it. If you use it right now use non of the Udma ones that you can use them with the adapters later. Startech U5 generic ones U4 at best. xblast tut: Xblast OS menu overview and flash bios (YT)

can I do that with an aladdin modchip and than hotswap to the xenium?

That is how I would do it 1. make a Folder c:/Bios and copy over cerbios 2. in C copy xblast open it and flash cerbios 3. buy hdd, 80pin ide cable and startech adapter 4. make cd with hexen or ogxbox installer and format hdd with it (small hdd) // for big hdd use fatxplorer 4.5. Big hdd after format use cd with hexen or ogxbox installer to put all the files on 5: ????? 6. Profit

Yes I do use Breadbord jumpers on the one side and soldered to the chip on the jtag and with a pinheader on the lpc side but I bought all the parts for it.

I currently use a rpi 2B maybe I will try again with a pi zero w

hmm shit