John5MM

I solved the problem !!!! Look 1:08 m And look now (picture xbox 2) What have I done ? I used an external power supply (smartphone charger) and the picture is clear :)

I replaced the capacitor on the board, but no improvement. Do you have other ideas?

Hello, I made 2 adapters on the cable, the board is the same as here . And I tested them on 2 xbox all version 1.4 The first gives a clear picture on the TV screen The second is like waving colors on a TV screen. Does anyone know why the second xbox gives a worse picture?

No, It is cheaper to buy a used 220V power supply. Thank you very much for help

Hello, I have this power supply in the American version 110V. Can someone help me and write how to convert this power supply to 230V (exact instructions)?

I will not take pictures, but the board is in perfect condition (clock cap is ok), paths also not cracked, capacitors are all working. The problem is unusual and beyond my abilities. One of my friends ordered a modification of the x 1.4 from me I made a TSOP, added a larger 250GB disk and an additional 64MB of RAM, everything worked great for me. Unfortunately, when it happened, he turned on the console, he played a few hours and the console stopped showing signs of life, no reaction to the switch, sometimes it will click and blink green twice, only alternately green and red (but it is mainly dead to listen to a snap as if it wanted to start) . He sent it to me and what's interesting, the console fired from the shoe, no delays, no errors, the disk is loaded elegantly - then I was a bit stupid. I disassembled the console, checked the power supply, soldered the suspicious February in the power supply, on the atx connector in the xbox, in the a / v connector. I also sold additional frames, gave an 80-wire cable, an ata-sata adapter, a 500GB sata disk (stuffed games), overall xbox works for 6 hours with copying and nothing crashed (after that, I played it for a few more hours) and NO problems. I sent it to a friend, and here departure, the console fired once and hung on the ind-bios screen and so much further it does not get up, and when it gets up, as above, it is green 2 times and flashes red - green color (even without the AV cable connected - and it should then flash orange). I thought it was the fault of the Hdmi cable, as well as my component component - but these work without any problems on x 1.6. That's why some kind of massacre works out of my shoe, doesn't it, did anyone have such a twisted case?

Unfortunately, I can't take photos. The capacitors are all in very nice condition, no leaks, but I will measure them. If it's not capacitors, what could it be?

Hi, I have a problem with starting XBOX. When I press power, nothing happens, only a hissing sound and a "knock" emanating from the console, as if from the power supply, (something like the console board wanted to turn on but could not). No picture and no errors led on the console. Please advise what can cause this, I will add that the 1.4 board is in very good condition, there are no loose capacitors, the paths are intact and in very good condition. The power supply is checked and working. I changed the console TSOP, ver ind-bios 5003 and it worked for 2 weeks without any problems. Please help.

Problem solved, look.

Or maybe it's the fault of the SATA adapter, what adapter you want and you are 100% sure

I will be rehearsing with other disks. But the problem is only with 500GB sata drives. The 320 GB drive works great.

How do you want to set the original Samsung DVD-ROM to the SLAVE position (when this valve is not present)

No my friend , sata2ide must set to SLAVE , because when I give to MASTER, xbox does not load XBMC.

I use such a cable I connected : Blue - HDD Middle black- DVD Black- motherboard xbox Is the ata 133 cable compatible with the original ATA in xbox ?

I still have a question I have the original Samung DVD-ROM and it is 100% working. When I connect it to IDE ATA 100 tape and ATA-SATA adapter and 500GB SATA HDD. When I put the disc into the drive, it only shows "BUSY" and "invalid path" ' Why is the drive not working well?

Yes, all is greate.

How to copy files from your PC to the new hard drive with FATXplorer Beta 3.0 I already know, thank you very much

Tansalator translates badly, so I'll be writing simple. The GDR 8163B was flashed but had badly connected cables, so the drive board probably got burnt. The disk was dead. Someone probably falsified the console with the wrong bios and hence FRAG, the console is currently working on the Alladin chip with IND-BIOS 5003 ATA-SATA adapter with JM20330 chip. Thank you very much for the program Fatxplorer beta 3.0 is very simple and it works !!! What program would you recommend to copy files to the disk prepared in this way? Because Xplorer360 does not read partitions on one of the disks, even though the formatting process was successful.

Capilators is OK. Okay guys, I sat a while and that's what I agreed There is no sound because the TV was muted and the picture was without color, because I do not have a remote control. More importantly: 1 console was made GDR 8163B just a pity that some donkey did it on the connector plug to the drive and not to the board, another fumbled and confused the pins and killed the drive - probably burned, besides, the seller wrote that he failed to insert the drive and is deep inside housing - of course, if he did not cut the pins inside the housing !!! 2 The disk is said to be formatting and uploading the system, especially since you can hear the head ticking - disk on plates and magnets. 3 Chip inserted into the board but point D0 not connected, connected and the board started every 10 times. The chip as a memory had some cube without inscriptions, probably some Chinese counterfeit, fortunately I had another broken xt alladin, I translated the original eprom and the console starts on the xecuter 5003. 4 The board, without the chip, only the green LED was blinking, because one of the tracks was interrupted (the one on the front of the board), frequent faults ver 1.0-1.1. After fixing the track, the console shows FRAG, the board had flashing jumpers. The owner wrote that the console simply refused to obey. Could it be that TSOP broke from using the console? I also have a problem, I bought a Seagate ST3500413AS 500GB drive, but when I put it in the console and put the DVD with the installer, the disc does not boot and only shows error 13 or 14. I use 80 ATA tape and ATA-SATA adapter and 320 GB SATA disk, no problem with booting. How to run the installer when the console starts? How to prepare a disk for PC (windows 7), the disk itself with FATX file format and partitions and XBMC ? Please answer.

Ok, thanks you

Hi, i have xbox 1.0 and i have a problem with it. When I turn on, I do not have a signal video and audio to the green LED, it blinks 3 times, then it lights constantly. When I connect the alladdin, the video is sometimes broken, the green LED lights up in the thread. (how was the work, normal work) However, it was from sound, it does not give a video and so every now and then (picture as it is white) The cable component is working. What is your problem? Any ideas please.

Can i use AMS1117 instead of LM3940? And is it Inter-Tech mini-ITX PSU working fine ?

ShinGoutetsu Sorry for my English. I have a question Have you tried to use picoatx160W ? What kind of 12V power supply do you use to power the Xbox? Can I schematic and data ATX to XBOX, I want to adapt it to 1.4 version?