Leaderboard

Hi guys hope it helps those who have a broken/missing usb ports on the x3cp v1.0 needed a few minor dimensional changes to fit snugly in the stock x3cp usb board slide slots i had to shave off 1-2mm from the sides of the pcb for it to seat properly and not damage the housing. these files are v1.1 and the required changes have been made i recommend 1.00mm-1.6mm board thickness any questions feel free to ask https://mega.nz/#!LkNAFYSJ!SDPPguhC64fcmEvT2RkIuT_xdSYkedqKGIfJJlUAJQA

Hey guys here is a ton of original xbox downloads in here and I will be add more daily

I used the ISO method for the few games that dont work form HDD (there are a few) and also for games that had THOUSANDS of small files. The small files dont play well with a 2tb drive due to cluster size. The 3tb had 64k cluster size and any file smaller than that will always take 64k on the drive. This means that these games will take more space than expected on the hard drive. I believe this is the only way i got as many games as i did onto the xbox. I have probably approx 100 games as ISO. If you are using a 2tb hard drive then you will need to use XB Partitioner to make sure that your F & G partitions are both 927Gb. Take a look at this thread it should give you what you need to get the job done.

https://drive.google.com/open?id=1QmJnbB-NJFH4f3TgVBmit-GRrSJ3Ah4M