Leaderboard

way to go neighbor

this probably was the trouble inspected everything resoldered every capacitor and resistor in the ram area, now it booted. oh yeah, the tester is your friend. CASE CLOSED.

How did you solder the RAM? Each leg individually or drag technique with the appropriate solder tip? If u dragged make sure u didn't accidently remove or bridge any SMT component next to the RAM pads if u look closely u can see that there are tiny resistors by the pads

What was your source for the extra RAM ? I also just recently tsopd a 1.2 mobo w/ IND Bios 5003 & did the RAM upgrade & had no issues... Did the system work before the RAM & tsop? If u removed all the extra RAM u installed & cleaned up the pads from any bridges, then the only thing in mind that I think it could be is either a bad tsop flash or random solder splatter from installing the RAM...

I purchased a 70mm AVC fan with a higher CFM around 45.7 and 5400 rpm, in a local digital store, to test it on my xbox, after installation, I turn on my xbox and it sounds like a mini jet engine. after playing games around 2h, I returned to the xbmc, and I am surprised because the CPU temperature is 19 ° C and the GPU is 18 ° C ,and the fan runs only at 50%.

Hey guys, here the Alpha test of the mod. Some cars have small wheel because i didn't edit the two files vehicle.ide and handling.cfg. Downloads: https://mega.nz/#F!HA5QFaQC!fsBTmUDhPHKy6vyPAYAO9Aurl Current Progress: -Edited effect.fxd : -Fast and small effect particles. -All laggy effect fixed. -More FPS. -Replaced grass with lq grass.(you can run in grass without losing FPS. ) TO DO LIST: -Replace rest of vehicules. -Replace textures of building with better ones.