-
Posts
103 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Calendar
Store
Everything posted by Dave C.
-
Latest Build Hi John, I took your latest build and built a fresh copy and loaded it on the Xbox and it ran extremely slow (almost unusable) I figured it might have something to do with my new 2TB setup. I took the copy that I had setup before that I configured to auto login, adjusted screen size and a few other preferences and it works fine. Any thoughts? Thanks, Dave
-
Hello, I had been using Testers Modeling Spray Paint but it is very expensive. I get the same or better results with the Rust-Oleum (but only that version in the picture below). I only use that Gorilla Tape to mount them and never have had a problem with it.
-
Can someone please confirm that only the Pads at R7D3 (on the top of the board) and the Pads at R7R3 (on the bottom of the board) need to be soldered and there is no jumper wire or other modifications needed if the TSOP is a Winbond TSOP and not a Sharp TSOP.
-
It doesn't specifically mention the Aladdin XT Plus2.. Do you think it would work with that one? The only reason I ask is that I picked up a new sealed one cheap.
- 10 replies
-
- solderless
- 1.6
- (and 5 more)
-
How To Install an Aladdin XT Plus 2 Modchip in a 1.6 Xbox
Dave C. replied to OGXbox Admin's topic in Modchips
Well, I just bought one of these new (sealed) on eBay for $12.50 and will be a project soon with my sealed 1.6 on the shelf. -
Can Somebody Plz Skins of Different Nations?
Dave C. replied to Frank D'Agostino's topic in UnleashX Skins
Where did you get the other skin pack? Can you upload it? -
Can Somebody Plz Skins of Different Nations?
Dave C. replied to Frank D'Agostino's topic in UnleashX Skins
I just loaded the skins too. Anyone you like in particular? -
What is the HeXEn path number?
- 6 replies
-
- hexen 2017
- hdd
- (and 7 more)
-
I got it downloaded fine as well.
-
It should be AYBX and then start.
- 6 replies
-
- hexen 2017
- hdd
- (and 7 more)
-
Is There a Replacement Dvd Laser for All 3dvd Drives?
Dave C. replied to Frank D'Agostino's topic in New Member Introductions
Hey Frank, this is the one for the Thomson: http://www.ebay.com/itm/Replacement-DVD-Driver-Laser-Lens-for-XBOX-Thomson-TOP-60-Gray-/132059152033?hash=item1ebf56bea1:g:WxkAAOSwVFlUGPge- 4 replies
-
- there
- replacement
- (and 6 more)
-
I just replaced the Laser and belt in a Thomson DVD drive and I am having trouble getting it back together properly. The white tooth arm that raises and lowers the spindle does not want to cooperate when I am putting the tray back in. I can get the try back in fine but the drive spindle is not raising and lowering. Anyone know the correct procedure to get it back it? It has to be some kind of alignment issue with that white arm.
-
I just download (painfully from another site) the five parts it was in but haven't tried it yet.
-
I came across this picture and thought it may be helpful if not interesting in possibly identifying a sealed XBox's version.
-
As Tim the Toolman would say, 220, 221 whatever it takes Actually I used 320 with say medium speed on a decent Bosch orbital sander.
-
Don't laugh. An orbital sander. It turns out that when you paint it, at least with a solid color (pretty sure a translucent color would not work, that it appears perfectly clear. I am working on a pretty badly damaged one where I had to sand the front as well (by hand). I will post a pic if it turn out nicely.
-
Adding a Brand New Hard Disk (1tb Sata W/Adapter)
Dave C. replied to Dave C.'s topic in Hardware Mods
Lastly, I am a software guy (by trade) so I don't understand why this cable is needed if the drive works? I have built many PC's in my day and I am remembering how much I hate IDE cables because they are eventually going to pull apart (connector from cable) the more you connect and disconnect them but I don't remember an 80 wire IDE cable. I remember that SCSI devices had a bigger ribbon cable. -
Adding a Brand New Hard Disk (1tb Sata W/Adapter)
Dave C. replied to Dave C.'s topic in Hardware Mods
I just measured a V1.0 (as best as I could). It is about 21 ish and the 2 closest connectors are about 7 apart. This one is 24 and 6 apart. Do you think that is the best or keep looking? Also, I am going to check a newer version XBox because this one seemed tight but definitely seemed OEM. https://www.amazon.com/gp/product/B073CKHX7X/ref=s9u_simh_gw_i1?ie=UTF8&fpl=fresh&pd_rd_i=B073CKHX7X&pd_rd_r=C5STP10T8VJZV1KMNMZ1&pd_rd_w=zZt9o&pd_rd_wg=pQqoC&pf_rd_m=ATVPDKIKX0DER&pf_rd_s=&pf_rd_r=Q5F7MBRVQBVQJT4MCC22&pf_rd_t=36701&pf_rd_p=f719e185-4825-42a4-9507-9df1a19229d6&pf_rd_i=desktop -
Adding a Brand New Hard Disk (1tb Sata W/Adapter)
Dave C. replied to Dave C.'s topic in Hardware Mods
The cluster size is 32. If I put it all on one drive, it would be 64. -
Adding a Brand New Hard Disk (1tb Sata W/Adapter)
Dave C. replied to Dave C.'s topic in Hardware Mods
eBay has a 24 and a 36 that I found. Is 24 just right or would you go with the 36? -
Adding a Brand New Hard Disk (1tb Sata W/Adapter)
Dave C. replied to Dave C.'s topic in Hardware Mods
Do you think this is the best I can do as far as an optimized partition scheme for a 1TB drive? -
Adding a Brand New Hard Disk (1tb Sata W/Adapter)
Dave C. replied to Dave C.'s topic in Hardware Mods
Got ya! I am still messing with the partition size and am ordering a cable. Will this one work? https://www.amazon.com/gp/product/B073CKHX7X/ref=s9u_simh_gw_i1?ie=UTF8&fpl=fresh&pd_rd_i=B073CKHX7X&pd_rd_r=C5STP10T8VJZV1KMNMZ1&pd_rd_w=zZt9o&pd_rd_wg=pQqoC&pf_rd_m=ATVPDKIKX0DER&pf_rd_s=&pf_rd_r=Q5F7MBRVQBVQJT4MCC22&pf_rd_t=36701&pf_rd_p=f719e185-4825-42a4-9507-9df1a19229d6&pf_rd_i=desktop -
Adding a Brand New Hard Disk (1tb Sata W/Adapter)
Dave C. replied to Dave C.'s topic in Hardware Mods
Ok, so just as an added bonus, the 1TB SATA Drive works with the original 40 pin stock Xbox cable and the $7.99 converter I bought on eBay. The converter must do what ever pixie dust and voodoo needed to use the stock cable. The proof is in the pics http://www.ebay.com/itm/SATA-to-PATA-IDE-Hard-Drive-Adapter-Converter-3-5-HDD-Parallel-to-Serial-ATA/381459010587?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 Thanks for all the help!
Board Life Status
Board startup date: April 23, 2017 12:45:48