zatchbot Posted October 21, 2022 Report Share Posted October 21, 2022 I did a ram upgrade and swapped a 1.0 heat sink onto a 1.2 mobo and no get a solid black picture with no sound? I thought I may have screwed up the ram but get the same result when I plug a chip in with xblast. Then I noticed that if I plugged in my hard drive the light ring switches to my XBMC settings. I get the same result when booting from disk also. There does not seem to be any missing components from the board around any of the work areas. This was an issue with both component and composite cables. Anyone have any ideas on what to check next? Quote Link to comment Share on other sites More sharing options...
Prehistoricman Posted October 22, 2022 Report Share Posted October 22, 2022 What BIOS are you using? I have seen some similar stuff from EvoX before. Quote Link to comment Share on other sites More sharing options...
zatchbot Posted October 22, 2022 Author Report Share Posted October 22, 2022 1 hour ago, Prehistoricman said: What BIOS are you using? I have seen some similar stuff from EvoX before. Cerbios 2.03R Quote Link to comment Share on other sites More sharing options...
.thumb.png.f42da7287d0f269627e60f69c2f54ecc.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.