G'day mates ! (typical aussie speak i swear)
I've had a bit of a break from the OGX scene however I am back now and picking up the peices after I did what I wanted to with some old projects.
Thanks to @SS_Daveive got a $20 bargain 1.4 board working again (afte I butchered an LPC build) however I want to extract an old bios file I wrote a couple of years ago on my Duo x3 chip.
Whats the best tool to estract it and then edit it to see what is in it so I can modify it for this new box. As I have a strong feeling the file I wrote was for a slimeline I made with a DVD delete, however It has some colours and settings I changed that I want to use for this new OGXBox.
Cheers - Dan
I have an OG Xbox that no longer works, I've tried a different power supply and replaced some capacitors that were bad no luck, my friend gave me a working Xbox same model. Is it possible to swap the drive from my dead one to the "new" one and retain all the data? Also if I can't do that would it be possible to transfer the save data and games to the new system?
I recently acquired and old Xbox 1.1 with a a hard drive and disk drive both dead. It came with Aladdin XT2, so i switched the old hard drive to a new 80GB one and managed to install a new dashboard using an old computer disk drive i had laying around. Everything seemed to work fine and the console booted with Unleash X, but almost all games i tried installing on it's hard drive won't work. Dashboard tries to launch them, but the console simply resets to it's main dashboard. Not all games failed thought, 4x4 Evolution 2 and AMF Extreme Bowling started and worked fine without problems, but this is more of an exception than rule. It's weird, cause all emulators worked, and i was able to play Quake 1, 2 and 3 homebrew ports with no problems at all. Can someone please help me? Thank you!
Recommended Posts
Similar Content
I've had a bit of a break from the OGX scene however I am back now and picking up the peices after I did what I wanted to with some old projects.
Thanks to @SS_Daveive got a $20 bargain 1.4 board working again (afte I butchered an LPC build) however I want to extract an old bios file I wrote a couple of years ago on my Duo x3 chip.
Whats the best tool to estract it and then edit it to see what is in it so I can modify it for this new box. As I have a strong feeling the file I wrote was for a slimeline I made with a DVD delete, however It has some colours and settings I changed that I want to use for this new OGXBox.
Cheers - Dan
Board Life Status
Board startup date: April 23, 2017 12:45:48