Found the pin out
So I need to bridge white to black, think it's a 1.6v
But do I also need to bridge blue to black to keep it powered on? It's going to power one fan for a 3D printer using the molex connector
I had xodus matrix on my ogxbox, and the original IDE HDD went bad, so I got my self 120gb SATA SSD harddrive, 80pin cable, IDE-SATA adapter. I decided to remove the chip when I removed the clock capacitor and reinstall it.
I installed the new SATA HD with the adapter and I try to boot-up I don't get xodus matrix Bios at the bottom of the screen, and Hexen 2020 does not load. I am not sure if I need to re-program the chip and reload the Bios (which I no longer have) again. I still got the programmer board, and the loader winLPC tool...any advice what/where I get a BIOS to move forward and make sure it is not a modchip issue
Here is a TSOP flasher which fits on a 8MB memorycard.
All game saves which works for the normal softmod works here as well and are included. The DL contains a PAL and a NTSC version. It has a EvoX M8+ noDVD F+G Bios on it in 256kb and 1024kb. And one 256kb with raincoat to flash a Winbond TSOP. So now no one needs to softmod just to flash the TSOP. And you can simply change the bios files if you like some thing else but for the most the EvoX should be fine.
Board Life Status
Board startup date: April 23, 2017 12:45:48