Jump to content
  • Similar Content

    • By jayjr1105
      So I bought a cheapmod from ebay to try something different on a 1.6.  Soldered in the rebuild board and installed the chip, adding the one wire from the lower LFRAM via to pin 3 on the LPC header.  Won't boot from chip, and on top of that, installing the chip causes the LFRAM cut I made to then have continuity thus booting the stock TSOP chip.  I would think I screwed something up but I slapped my openxenium chip I have in my parts drawer and it works fine.  I've been looking at diagrams for 2 days now and can't figure it out.  Does Pin 4 need removed from the pin header I soldered in?  I've seen some guides that say Pin 4 can't be installed for this.
      Please login or register to see this attachment.
    • By bulkchart32
      i'm using the official xbox HD adapter and high quality component cables but i always get interference. anybody know why and a way to fix it?
    • By bulkchart32
      for some unknown reason, xbmcegamers can't see the halo 2 update. it works fine with unleashx but not xbmc4gamers. anyone know of a fix?

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.