Jump to content
  • Similar Content

    • By mpnet
      Hello everyone,
      i'm new on the scene and a month ago i started with my first modded xbox project. I'm from the Netherlands and have a pal 1.6 hardmod xbox with EVOX M8 bios.
      I make it to ntsc so i can use all hd modes and using the pound hdmi cable. My goal is to have a xbox with all games that where release on it on 1 disc. So i put a Seagate 3TB disc so i get the max of 2TB and use xbmc4gamers as dash. I found almost all games now, its a pretty challenge to fit them all (using soms ntsc instead of pal games or deleting all un needed files ).
      i'm now in the mode to test al games (i start the game and go to the first level) and now i''m on the letter c with the club football games. There are around 36 titles (2003 and 2005 versions) but non of them starting. When i started it it goes to a black (blank) screen and nothing happend. I try different sources from games, all the same. Patching ith with 480p loader has no effect. I can find an ACL patch and default patching doesn't work. I don't think it's a image problem, because all club football editions don't start. All other games (so far i tested, now about 200 games) are starting fine (sometimes with patching or finding an other source\version of the game).
      Any idea how i can start these games to work?
      Greetings,
      Mpnet
    • By farrdeamer
      Hi all,
      I recently pulled my OG Xbox out of the garage to set it up for my 9yo to have a play on. Looking forwards to showing it off to her, I tested it and it worked fine but thought I had better remove the clock cap for safety (no leaking but checked to make sure). Then let her have a go at a game - worked fine. Then after rebooting, error 12.... 
      I took the drive and put it on the PC and quickly took an image of it using HDDRawcopy, which showed around 8 bad sectors and the drive was reporting SMART errors too, so it's toast.
      I got a larger SATA drive and put it in using an amazon purchase IDE-SATA adapter, but still get the error 12 - is there any way to read the drive on a PC and repair the damage/reinstall whatever is used to boot (as there was a lovely setup of xecutor2 dashboards on there I would rather not lose).
      Otherwise, if there is no way to recover it.  I tried using Tru Hexen 2020 to try and setup another drive, but the DVD won't boot (HDD is set to slave, I get error 17) 
      Any help gratefully appreciated (it's a hard modded unit- xectutor 2 from memory)...
       
    • By Fredrito
      I recently tried to softmod my old xbox and bricked the hdd due to not ejecting the game disc in the end of the installation process. Now the dashboard is gone and I can't even boot retail games using the machine.
      I just bought an xbox with a modchip (xecuter 2) and I'm wondering if I could swap the hdd in the modded xbox with the bricked xbox and install the ms dashboard from a disc.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.