Jump to content
  • Similar Content

    • By Edge
      Hi Everyone!
      I'm Edge, I've been involved in various console scenes since 2001. I was a previous member on X-S and have to say OGX is the next incarnation with a wonderful sense of community, helpful users and great information. I'm honored to be here.
      I've been involved in a number of "preservation" scenes including Saturn, DC, and Gamecube and have done hobbyist development on a number of systems. Like many real life pulled me away from consoles, I had sold many of my modded consoles. My kiddo has gotten old enough now to take an interest in "retro" (retro to her at least haha) gaming so it rekindled my interest and now I'm building "complete" consoles for each generation (catered game collections with all DLC and patches all playable from a console). I recently got a mystery eBay box with lots of classic XBox items that got me started on the xbox path again and so here I am, needing some assistance and already getting some great help and finding great materials.
      Thanks for keeping the OG Xbox torch going!
    • By Edge
      So I recently learned a valuable lesson about TSOP flashing when I flashed my 1.0 with iND-BiOS.Beta.Feb-11-05.67.bfm.bin rather than the non-BFM version of the bios. I was wondering what the practical purpose of the BFM (Boot from Media) bios is, and how one would even use it?
      I'm assuming it is a BIOS that something can load AFTER the Xbox as already booted and initialized all hardware?
    • By KpCollins
      All Xbox's I mention are Tsop'd 1.0,1.1& 1.4 .I'm receiving the errors above, this is only with the sata HDD and a convertor I got off ebay. I have one in another tsop xbox and it runs fine
       
      So I have 3 convertors, all are the same and 1 runs just fine. The other 2 give the error codes above.
      The one working is using the original Xbox's IDE Cable with a slow 5400rpm 2tb Drive. Works flawlessly
      The other 2 Tsop xboxs ( 1.0 & 1.4 ) do not want to accept the Sata Drives, Their original Stock HDD with UNleashX Dahboard works fine on both.
      All drives are set to unlocked
      the 1.4 runs EvoM8+
      The 1.0 Run x2 5035? Think thats right. - Same as the 1.1 that works.
       
      I've read this could be an issue with the Sata Adaptor, IDE Cable only being 40wire, Drives or Both.
       
      Its worth mentioning I've tried a few different hdd's with the same issue on all Sata's. I can get Hexen2020 to boot on both but Hexen also struggles to read the drives.
      On the 1.4 I backup the Eeprom to the HDD and it will boot but to the Xbox Dash and as soon as I try with the UnleashX Dash I get the errors again.
       
      I am close to ordering an 80wire ide cable to try see if this resolves it, Failing that The more expensive adaptor for IDE made by Star tech which i'd wished to avoid.
       
      1 more thing, the IDE to Sata Adaptors being set to Master gives the error. Without the Pin in cable select does nothing but freeze on the Blob Screen
      Slave mode causes it to freeze also.
       
      Any advise is really appreciated.

Board Life Status


Board startup date: April 23, 2017 12:45:48
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.