Xblast Lite CPLD Programming

[fritzelmaster]

I am trying to program the CPLD of a Xblast Lite that I built. Got the PCB from a friend. I flashed the tsop on the chip successfully.

The cpld seems to be programming, but the xbox still frags when I try to boot with the chip.

I am using the Flashcat USB programmer and software. The file I am flashing is XblastLiteV1.xsvf: https://github.com/Kekule-OXC/xblast_lite_cpld/tree/master/xilinx_ise

I am not 100% sure that this is the right file, but flashcat seems to not work with jed files, so it is my only option at the moment. 

The output log of flashcat says that I flashed successfully, but first it says "SVF Player: Failed sending XSDRTDO command (line index: 20)" so I am wondering if that has anything to do with the fragging. 

Does anyone have experience with this?

Here is the log from flashcat:

Disconnected from FlashcatUSB Classic device
Connected to FlashcatUSB Classic, firmware version: 4.56
BSDL database loaded: 26 total definitions
JTAG TCK speed: 1 MHz
JTAG chain detected: 1 devices
JTAG TDI IR chain size: 8 bits
Index 0: JEDEC ID 0x59604093 (Xilinx_XC9572XL_(VQ44))
JTAG engine setup successfully
JTAG index 0 selected: Xilinx XC9572XL (IR length
Checking for a device specific script to automatically load
Button Hander::Calling Event: RunXSVF
Running XSVF file in internal JTAG XSVF player
SVF Player: Failed sending XSDRTDO command (line index: 20)
SVF Player: TDO: 0x03FFFE
SVF Player: Expected: 0x000001
SVF Player: Mask: 0x000003
XSVF file successfully played
Button Hander::Calling Event: Done