fritzelmaster Posted February 22 Report Share Posted February 22 I am trying to program the CPLD of a Xblast Lite that I built. Got the PCB from a friend. I flashed the tsop on the chip successfully. The cpld seems to be programming, but the xbox still frags when I try to boot with the chip. I am using the Flashcat USB programmer and software. The file I am flashing is XblastLiteV1.xsvf: https://github.com/Kekule-OXC/xblast_lite_cpld/tree/master/xilinx_ise I am not 100% sure that this is the right file, but flashcat seems to not work with jed files, so it is my only option at the moment. The output log of flashcat says that I flashed successfully, but first it says "SVF Player: Failed sending XSDRTDO command (line index: 20)" so I am wondering if that has anything to do with the fragging. Does anyone have experience with this? Here is the log from flashcat: Disconnected from FlashcatUSB Classic device Connected to FlashcatUSB Classic, firmware version: 4.56 BSDL database loaded: 26 total definitions JTAG TCK speed: 1 MHz JTAG chain detected: 1 devices JTAG TDI IR chain size: 8 bits Index 0: JEDEC ID 0x59604093 (Xilinx_XC9572XL_(VQ44)) JTAG engine setup successfully JTAG index 0 selected: Xilinx XC9572XL (IR length Checking for a device specific script to automatically load Button Hander::Calling Event: RunXSVF Running XSVF file in internal JTAG XSVF player SVF Player: Failed sending XSDRTDO command (line index: 20) SVF Player: TDO: 0x03FFFE SVF Player: Expected: 0x000001 SVF Player: Mask: 0x000003 XSVF file successfully played Button Hander::Calling Event: Done Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.